#ifndef APP_COMMON_H
#define APP_COMMON_H

#include "../clib/type.h"
#include "../bsp/bsp_config.h"

#define APP_VERSION 0x10

// #define D_COUNT_WEIGHT(adc)    (U32)((adc)  / D_ADS1213_GAIN_VAL / R.p.lmd * R.p.weight_max * 1000  / (2 * 0x7FFFFF / 1000 ))
// #define D_COUNT_ADC(wInG)      (U32)((wInG) * D_ADS1213_GAIN_VAL * R.p.lmd * (2 * 0x7FFFFF / 1000) / R.p.weight_max / 1000)


// //STEP 1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Register CONFIG 
// //寄存器编号从1开始
// //#define D_COUNT_WEIGHT(adc) (U32)(1000.0 * R.p.weight_max * (adc) / (2 * 0x7FFFFF / 1000 * D_ADS1213_GAIN_VAL * R.p.lmd))
// //#define D_blur_threshold_2_1(threshold)   (U32) ( 1.0 * threshold *(2 * 0x7FFFFF / 1000 * D_ADS1213_GAIN_VAL * R.p.lmd) / (1000.0 * R.p.weight_max ))
// #define D_COUNT_WEIGHT(adc)    (U32)((adc)  / D_ADS1213_GAIN_VAL / R.p.lmd * R.p.weight_max * 1000  / (2 * 0x7FFFFF / 1000 ))
// #define D_COUNT_ADC(wInG)      (U32)((wInG) * D_ADS1213_GAIN_VAL * R.p.lmd * (2 * 0x7FFFFF / 1000) / R.p.weight_max / 1000)

// #define ADC_status_chx_Ready_BASE 0x01
// #define ADC_status_ch1_Ready 0x01
// #define ADC_status_ch2_Ready 0x02
// #define ADC_status_ch3_Ready 0x04
// #define ADC_status_ch4_Ready 0x08
// #define D_ADC_CHANNEL_NUM 4	

typedef struct global_register
{
	//本机ID
	U8 slave_id;

	//低功耗模式
	U8 low_power_mode;

	//功能按键
	U8 func_btn;

	//NFC缓冲区
	struct {
		//nfc卡号，只取后2个字节
		U8 nfc_no[2];
	}nfc;

	//RFID缓冲区
	struct {
		//rfid卡号，只取后2个字节
		U8 rfid_no[2];
		//rfid信号强度
		U8 rssi;
		//rfid天线编号
		U8 ant;
	}rfids[4];
}GlobalRegister;

extern GlobalRegister R;

//寄存器内存基地址
#define REG_MEM_BASE                ((U16*)(&R))	//寄存器基础地址（本文件外部不应该使用该宏定义）
//变量地址转寄存器
#define MEM_2_REG(mem)              (((U16*)(mem) - REG_MEM_BASE) + 1)
//寄存器转变量地址
#define REG_2_MEM(reg)              (REG_MEM_BASE + (U16)((reg) - 1))
//STEP 1 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<Register CONFIG End







//STEP 2 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Global Variables CONFIG 
typedef struct global_param
{
	U8 xx;
}GlobalParam;
extern struct global_param G;
//STEP 2 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<Global Variables CONFIG End

extern void L3_param_init(void);
extern void L3_reg_2_iap(void);
extern void L3_iap_2_reg(void);
extern void L3_reg_reset(void);
extern void L3_reg_init(void);

#endif