You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
245 lines
7.6 KiB
245 lines
7.6 KiB
//////////////////////////////////////////////////////////////////////////
|
|
/// COPYRIGHT NOTICE
|
|
/// Copyright (c) 2015, 传控科技
|
|
/// All rights reserved.
|
|
///
|
|
/// @file main.c
|
|
/// @brief main app
|
|
///
|
|
///（本文件实现的功能的详述）
|
|
///
|
|
/// @version 1.1 CCsens technology
|
|
/// @author CC
|
|
/// @date 20150102
|
|
///
|
|
///
|
|
/// 修订说明：最初版本
|
|
/// Modified by:
|
|
/// Modified date:
|
|
/// Version:
|
|
/// Descriptions:
|
|
// 20160413 CC-ACC-VH02
|
|
// 连接至 J22 RXD0 TXD0
|
|
//P5_DIR &= ~BITN1; //p5.1输出TXD
|
|
//P5_DIR |= BITN0; //p5.0输入RXD
|
|
//P5_SEL0 &= ~(BITN0 +BITN1); //设置P5.0 P5.1为UART0 RXD TXD
|
|
//P5_SEL1 |= BITN0 +BITN1;
|
|
|
|
/*****************************************************************************
|
|
update by cc @201700110
|
|
针对多串口 和 单一串口 有区别 每个串口是独立的还是分开的有讲究 程序是复杂的还是软件应用简单是
|
|
个需要平衡的事情.
|
|
|
|
clib/clib.c:
|
|
公用的函数 和硬件无关
|
|
放置串行模式(串口等其他通讯总线类的输出)输出的函数,
|
|
一些覆盖模式输出的(lcd等固屏输出的)的也可使用
|
|
void Lc_print(void (*L0pf_send_uc)(char ww), char *dat,...)
|
|
-----------------------------------------------------------------------------------------
|
|
uartcom/Uprotocol2app
|
|
协议到应用
|
|
为了适应不同的通讯协议需要不同的uart口来对应 和应用相关
|
|
|
|
typedef struct _ts_lcm_pro_; 应用协议包的定义? LCM的协议------------
|
|
L3_UARTcom0_exp_protocol 解析应用协议
|
|
-----------------------------------------------------------------------------------------
|
|
uartcom/urec2protocol: 接收到的数据放入到指向特定协议的缓存中，和协议的格式有关 一般分为 标头式或者标尾式
|
|
公用的串口通讯定义
|
|
struct _s_uart_rec_ 的公共协议包(关键的结构体)的声明------struct _s_uart_rec_
|
|
void L1_uart_2buf(struct _s_uart_rec_ *p)串行数据保存到指向特定协议的缓冲中
|
|
--------------------------------------------------------------------------------------------
|
|
msp/uartx.c 底层代码 和cpu相关 缓存发送也放在里面
|
|
L0_UART0_Init
|
|
UART0_IRQHandler
|
|
L0_Usend_uc------UserDef
|
|
-----------------------------------------------------------------------------------------
|
|
********************************************************************************/
|
|
#include "uart2.h"
|
|
#include "../bsp/bsp_485.h"
|
|
#include "../app/app_common.h"
|
|
|
|
struct _s_uart2_send_buf_ s_uart2_send_shop;
|
|
struct _s_uart2_send_buf_ s_uart2_send_depot;
|
|
//#define BAUD2 4800 //串口波特率
|
|
//#define BAUD2 9600 //串口波特率
|
|
#define BAUD2 115200 //串口波特率
|
|
void L0_uart2_init(void)
|
|
{
|
|
S2CON = 0x50; //8位数据,可变波特率
|
|
AUXR |= 0x04; //定时器2时钟为Fosc,即1T
|
|
//T2L = 0xE8; //设定定时初值
|
|
//T2H = 0xFF; //设定定时初值
|
|
T2L = (65536-(D_sys_Fosc/4/D_uart2_BRT)); //设定定时初值
|
|
T2H = (65536-(D_sys_Fosc/4/D_uart2_BRT))>>8; //设定定时初值
|
|
AUXR |= 0x10; //启动定时器2
|
|
|
|
//设置txd2为强推挽
|
|
BITN_1(P1M0,BITN1); BITN_0(P1M1,BITN1);//P11
|
|
|
|
//对于433模块，CPU可以控制的情况下需要拉低(PWDN)，
|
|
//如果不能控制需要人为短路
|
|
D_uart2_ES_INT_OPEN(); //打开串口中断
|
|
}
|
|
|
|
void L1_uart2_buf_init(void)
|
|
{
|
|
s_uart2_send_depot.p = s_uart2_send_depot.buf;
|
|
s_uart2_send_shop.now = 0;
|
|
L0_uart2_init();
|
|
}
|
|
void L0_uart2_uc(U8 ww)
|
|
{
|
|
s_uart2_send_depot.max = 1;
|
|
s_uart2_send_depot.buf[0] = ww;
|
|
s_uart2_send_depot.p = s_uart2_send_depot.buf;
|
|
L0_uart2_sendbuf();
|
|
}
|
|
|
|
void L0_uart2_sendstr(U8 *str)
|
|
{
|
|
//L0_uart2_sendbuf(str,strlen(str));
|
|
s_uart2_send_depot.max = strlen(str);
|
|
s_uart2_send_depot.p = str;
|
|
L0_uart2_sendbuf();
|
|
}
|
|
|
|
void L0_uart2_sendArray(void *buf,U8 len)
|
|
{
|
|
D_485_TX(); //切换到输出状态
|
|
//L0_uart2_sendbuf(str,strlen(str));
|
|
s_uart2_send_depot.max = len;
|
|
s_uart2_send_depot.p = buf;
|
|
L0_uart2_sendbuf();
|
|
}
|
|
|
|
// 发送buf数组 中的0----(num-1)
|
|
void L0_uart2_sendbuf(void)
|
|
{
|
|
register unsigned char n = 0;
|
|
if(s_uart2_send_depot.max >= D_send2_buf_max)
|
|
{
|
|
s_uart2_send_depot.max = 3;
|
|
}
|
|
D_uart2_ES_INT_CLOSE();
|
|
if(0 == s_uart2_send_shop.now)
|
|
{/// 上次的已经发送完毕了,或者第一次开始
|
|
/// (s_uart2_send_shop.now == s_uart2_send_shop.max = 0 buf中为空)
|
|
for(n = 0;n < s_uart2_send_depot.max; n++)
|
|
{
|
|
s_uart2_send_shop.buf[n] = s_uart2_send_depot.p[n];
|
|
}
|
|
s_uart2_send_shop.max = s_uart2_send_depot.max;
|
|
L0_uart2_IntTIClear();
|
|
s_uart2_send_shop.now = 1;
|
|
L0_uart2_set(s_uart2_send_shop.buf[0]);
|
|
}else
|
|
{// 需要插入
|
|
/// [0]--?--[pool.now]--?--[pool.max-1].......................................
|
|
/// [0]--?--[pool.now]--?--[pool.max]+[bath.0]--?---[bath.max-1].............
|
|
for(n = 0;n < s_uart2_send_depot.max; n++)
|
|
{
|
|
s_uart2_send_shop.buf[s_uart2_send_shop.max] = s_uart2_send_depot.p[n];
|
|
s_uart2_send_shop.max ++;
|
|
if(s_uart2_send_shop.max >= D_send2_buf_max)
|
|
{
|
|
s_uart2_send_shop.max = D_send2_buf_max;
|
|
}
|
|
}
|
|
}
|
|
D_uart2_ES_INT_OPEN();
|
|
}
|
|
|
|
|
|
/*************************************************
|
|
UART 中断
|
|
*************************************************/
|
|
#define D_SERVE_uart2 interrupt 8
|
|
void INTERRUPT_uart2(void) D_SERVE_uart2// using 2
|
|
{
|
|
D_uart2_ES_INT_CLOSE();
|
|
//------------------------------------------------
|
|
if(L0_uart2_IntRI()) //如果是U0接收中断
|
|
{L0_uart2_IntRIClear(); //清除接收中断标志
|
|
|
|
//UART0_PUTCHAR('%');
|
|
//>>>>>>>>>>>>>>>>>>>>>>>>>>>>>用户程序 添加协议>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
|
|
/// input: 解析协议函数 和对应的结构体变量
|
|
/// output: 对应的结构体变量中携带 缓存buf和协议ok的标志
|
|
//s_uart2_rec.reg = L0_uart2_get();
|
|
//s_uart2_rec.ok = 1;
|
|
G.modbusstmp = s_nos_tick.t_5ms;
|
|
(*Lp0_uart2_fun)(L0_uart2_get());
|
|
|
|
//<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
|
|
}
|
|
//------------------------------------------------
|
|
else
|
|
{
|
|
if(L0_uart2_IntTI()) //如果是U0发送中断
|
|
{
|
|
L0_uart2_IntTIClear(); //清除发送中断标志
|
|
#if 1 //433焊反 txd2->rxd2短路，暂时禁止发送数据，以免冲突
|
|
if(s_uart2_send_shop.max != s_uart2_send_shop.now)
|
|
{
|
|
L0_uart2_set(s_uart2_send_shop.buf[s_uart2_send_shop.now]);
|
|
s_uart2_send_shop.now ++;
|
|
}else
|
|
{
|
|
s_uart2_send_shop.max = 0;
|
|
s_uart2_send_shop.now = 0;//可以发送下一个数据
|
|
|
|
D_485_RX();
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
|
|
D_uart2_ES_INT_OPEN();
|
|
}
|
|
|
|
|
|
void timer0_isrHanddle (void) interrupt 1
|
|
{
|
|
NOP();
|
|
TF0 = 0;
|
|
|
|
//modbus协议处理
|
|
if(s_uart2_rec.head == 1 && G.modbusstmp - s_nos_tick.t_5ms >= 1) //收到一条协议
|
|
{
|
|
s_uart2_rec.head = 0;
|
|
crc16_irq(s_uart2_rec.crc,s_uart2_rec.buf,s_uart2_rec.num - 2);
|
|
if(s_uart2_rec.crc[0] == s_uart2_rec.buf[s_uart2_rec.num-2] && s_uart2_rec.crc[1] == s_uart2_rec.buf[s_uart2_rec.num-1])
|
|
{
|
|
if(s_uart2_rec.ok == 0)
|
|
{
|
|
s_uart2_rec.ok = 1;
|
|
}
|
|
//D_P32_REV();
|
|
}
|
|
}
|
|
|
|
//tick处理
|
|
#if 0
|
|
/// 65535*65535 /3600/24/365=139nian/s=1.39nian/10ms
|
|
///相当于1.39年后t_10ms 溢出，对于电池供电的系统而言 完全可以满足
|
|
// 4,294,836,225 = 65535*65535 ;3600*24*60*60 = 31,536,000秒/年
|
|
s_nos_tick.t_10ms ++;//D_led_D1_REV(); 20160522 验证
|
|
#else
|
|
L1_tick_tick(); ///系统中的1sflag 和以10ms为颗粒的延时使用 为tdelay服务
|
|
#endif
|
|
NOP();
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|