/*****************************************************************************
 *   uart.c:  UART API file for NXP LPC17xx Family Microprocessors
 *
 *   Copyright(C) 2013, cc
 *   All rights reserved.
 *
 *   History
 *   2013.05.24  ver 1.00    Prelimnary version, first Release

 *
******************************************************************************/

#include "target_cfg.h"
#include "type.h"
#include "time.h"
#include "uart.h"   
//#include "..\Sensor.h"

#include "debug_app.h"
struct _s_task_debug_led_ s_task_debug_led;

void L2_task_debug_led_init(void)
{
	D_P1_OUT(15);
	D_P1_OFF(15); //指示灯
	D_P1_OUT(16);
	D_P1_OFF(16); //指示灯

	while(0)
	{
		D_P1_OFF(15)	;
		L0_delay_ms(600);
		D_P1_ON(15) ;
		L0_delay_ms(600);
		L0_debugS_uc('a');	L0_USART_print(UART_debug,"\r\n");
	//	L2_oled_main();
	}
	L3_task_s_go(s_task_debug_led,D_task_debug_led_init);

	
}

void L2_task_debug_led_handdle(struct _s_task_debug_led_ *s)
{
	switch(s->task.sh)
	{

		case D_task_debug_led_init://
			L0_USART_print(UART_debug,"\r\n s_task_debug_led ");
			L2_task_go(D_task_debug_led_key);
		break;
		case D_task_debug_led_key  :
			D_P1_ON(15);
			L0_debugS_uc('^');
			L2_task_go(D_task_debug_led_key2);
			L1_task_idelay(D_idelay_1s);
		//	L0_oled_point(60,50,0x00);
			//L2_debug_Au4B48347975);
		break;	
		case D_task_debug_led_key2  :
			D_P1_OFF(15);
			//L0_debugS_uc('~');
			#if 0
			if((s->x ++)> 64)s->x =0;
			if((s->y ++)> 48)s->y =0;
				
			L0_oled_point(s->x,s->y,0xff);
			#else


		//	L0_oled_point(60,50,0xff);

			#endif
			L2_task_go(D_task_debug_led_key);
			L1_task_idelay(D_idelay_1s);
			//L2_debug_Au4B1234567);

		break;	

		L2_task_switch_default_idelay();

	}
}
void L1_debug_rx_handle(struct _s_protocol_ *p)
{
//	unsigned int i;
	p->cashe[0] = p->rbr;// 
	if(p->num > D_s_protocol_len)
	{
		p->num = 0;
		p->buf[p->num] = p->cashe[0];	
	}else
	{
		p->buf[p->num] = p->cashe[0];	
		p->num ++;
	}
}


struct _s_uart_config_ s_debug_config; 


#define D_debug_buf	s_debug_config.puart_config->st->buf
#define D_debug_buf_d(x)	s_debug_config.puart_config->st->buf[(x)]
#define D_debug_num	(s_debug_config.puart_config->st->num)

void L1_debug_init(void)
{
	ts_uart1.L1_uart_rx_handle = L1_debug_rx_handle;
	ts_uart1.st = (struct _s_protocol_ *)&s_at1;
	
	s_debug_config.usart = 1;
	s_debug_config.puart_config = &ts_uart1;	


	s_debug_config.type = 0;
#if 0
	while(9)
	{
		if(D_debug_num >= 1)
		{
			L0_Usend_uc(s_debug_config.usart,D_debug_buf_d(0)); 
			D_debug_num = 0;

		}
	}
#endif
}

//>>>>>>>>>>>>>>>>>>>>> debug led task