/*****************************************************************************
 *   uart.h:  Header file for NXP LPC17xx Family Microprocessors
 *
 *   Copyright(C) 2017,SensorControl
 *   All rights reserved.
 *
 *   History
 *   2009.05.27  ver 1.00    Prelimnary version, first Release
 *2017.01.10  ver 1.10    rename tick.h  tick.c
******************************************************************************/
#ifndef __tick_H 
#define __tick_H
#include "../clib/Type.h"
//#include "../bsp/type_hs.h"
#include "../msp/time.h"

struct	_s_nos_tick_
{	
	vU32 tp_count; 
	vU8 flag_50ms;
	vU32 sys_clock; 
	vU32 t_n; 		// 	noos系统定时器最小技术单元
	//vU32 t_50ms; 	//	noos 系统定时器10m技术
	vU32 t_100ms; 
	vU32 t_5ms;
	vU32 t_1s; 
	vU8 flag_1s; 
	vU8 flag_1s2; 
	vU32 n_stamp; 	
	vU8 t1s_heatbeart; 	//noos 系统定时器整秒时刻标志,需要软件清除 
	vU8 ts_flag;
};
extern struct  _s_nos_tick_ s_nos_tick;


//D_debug_sim_usinghhh
//10ms 不能使用，10ms是最小颗粒时长，存在误差，无法使用
#define D_Tdelay_ms		D_TIMER0_50MS_COUNT//D_TIMER0_10MS_COUNT		


#define D_Tdelay_100ms		(D_Tdelay_ms+2)
#define D_Tdelay_200ms		(D_Tdelay_ms+4)
#define D_Tdelay_300ms		(D_Tdelay_ms+6)
#define D_Tdelay_400ms		(D_Tdelay_ms+8)


#define D_Tdelay_1s		(D_Tdelay_ms+20)
#define D_Tdelay_2s		(D_Tdelay_1s*2)
#define D_Tdelay_3s		(D_Tdelay_1s*3)
#define D_Tdelay_5s		(D_Tdelay_1s*5)
#define D_Tdelay_10s		(D_Tdelay_1s*10)
#define D_Tdelay_15s		(D_Tdelay_1s*15)


#define D_Tdelay_1min	(D_Tdelay_1s*60)
#define D_Tdelay_10min	(D_Tdelay_1s*60 * 10)
#define D_Tdelay_1h		(D_Tdelay_1min*60)
#define D_Tdelay_1day	(D_Tdelay_1h*24)
#define  D_TIMER0_1S_COUNT		200
//#define D_10mS		1//D_TIMER0_10MS_COUNT			
//#define D_100mS		(D_10mS*10)
//#define D_1S		(D_10mS*100)



//>> 定时器: 初始化 间隔时间到
//			L0_nos_tick10ms_start(s->times);		开始初始化s->times  以10ms为一个单位
//			if(  L0_nos_tick10ms_interval(s->times) < 20)//  s->times 执行了20次后,也就是 定时20*10m到达


//必须配对
#define L0_nos_tick10ms_start(start_n) 		start_n = s_nos_tick.t_50ms	
#define L0_nos_tick10ms_interval(start_n) 	(s_nos_tick.t_50ms - start_n)


#define L0_nos_tick1s_start(start_n) 		start_n = s_nos_tick.t_1s	
#define L0_nos_tick1s_interval(start_n) 	(s_nos_tick.t_1s - start_n)


//>>>//必须配对
#define L2_tick_time_stamp(time_stamp)	time_stamp = s_nos_tick.t_50ms;
#define L2_tick_time_interval(time_stamp,time_overflow) (( s_nos_tick.t_50ms - time_stamp) > time_overflow)


#define L3_tick_interval(x)	L2_tick_time_interval(s_nos_tick.n_stamp,x)
#define L2_tick_stamp()		L2_tick_time_stamp(s_nos_tick.n_stamp);


//>>>示例如下:
#if 0
{
		case D_task_init://
 			Lc_print_buf(" \r\n YL_ init");
			s->step = D_AT;
			L0_esp_open();
			L2_task_go(D_task_YL_ready);
			s_uart0_rec.ok = 0;
			L2_tick_time_stamp(s->t_stamp);
		//	L1_task_idelay(1*D_idelay_1s);	//大约6s 
		break;
		case D_task_YL_ready:
			if(1 == s_uart0_rec.ok)
			{
				if(strstr(s_uart0_rec.array,"ready") != NULL)
				{
				
					Ldi_print("ready..\r\n");
					s->step = D_AT;
					L2_task_go(D_task_YL_ask);
				}
				s_uart0_rec.ok = 0;
			}
			if(L2_tick_time_stamp(s->t_stamp,1*D_idelay_1s))
			{// 时间溢出
				L0_esp_close();
				Ldi_print("fail esp restart.\r\n");
				L2_task_go(D_task_init);
				L1_task_idelay(2*D_idelay_1s);
			}
		break;
}
#endif


#define D_main_status_debug	2
#define D_main_status_run	3

// 他和t_10ms 关联,如果t_10ms递增为1时间隔为(D_TIMER0_10MS_COUNT*定时器间隔)
/// #define	D_TIMER0_10MS_COUNT	1	//定时器为 10ms一中断 


void L1_tick_init(void);
extern void L1_tick_tick (void);
//L2_time_beat_heart(D_TBH_ch1,2,'t')
#define  D_TBH_ch0	0
#define  D_TBH_ch1	1
#define  D_TBH_ch2	2
#define  D_TBH_ch3	3
#define  D_TBH_ch4	4
#define  D_TBH_ch5	5
extern void L2_time_beat_heart(vU32 ch,U8 invent,U8 s);
//void L2_time_beat_heart_fun(INT32U ch,unsigned char invent,void *fun(void));
extern void L2_time_beat_heart_fun(vU32 ch,U8 invent,void (*fun)(void));

#endif /* end __tick_H */
/*****************************************************************************
**                            End Of File
******************************************************************************/