/*****************************************************************************
 *   DEBUG_DRV.h:  Header file for  DEBUY DRIVER FILES
 *
 *
 *   Copyright(C) 2013, cc
 *   All rights reserved.
 *
 *   History
 *   2013.05.24  ver 1.00    Prelimnary version, first Release
 
 20160413 CC-ACC-VH02 修正
 
 led： pin33 P22 LED
 P16 P17    空置


******************************************************************************/
#ifndef __DEBUG_LED_H 
#define __DEBUG_LED_H

#include "../clib/type.h"
#include "../bsp/type_hs.h"



///P22是timer heratbeat
#define D_led_THB			BIT2
#define D_led_THB_SEL0		P2_SEL0
#define D_led_THB_SEL1		P2_SEL1
#define D_led_THB_SEL2		P2_SEL2
#define D_led_THB_DIR		P2_DIR

#define D_led_THB_REV()	D_P22_REV()
#define D_led_THB_ON()		P22 = 1
#define D_led_THB_OFF()	P22 = 0
#define D_led_THB_init()			\
	BITN_0(D_led_THB_SEL2,(D_led_THB));\
	BITN_0(D_led_THB_SEL1,(D_led_THB));\
	BITN_0(D_led_THB_SEL0,(D_led_THB));\
	BITN_0(D_led_THB_DIR, (D_led_THB));	// led_debug output

//>>>>>>>>>>>>>>>>CC-ACC-VH02 管脚空闲




///P23是debug端口
#define D_led_debug			BIT3
#define D_led_debug_SEL0		P2_SEL0
#define D_led_debug_SEL1		P2_SEL1
#define D_led_debug_SEL2		P2_SEL2
#define D_led_debug_DIR		P2_DIR

#define D_led_debug_REV()		D_P23_REV()
#define D_led_debug_ON()		P23 = 1
#define D_led_debug_OFF()		P23 = 0
#define D_led_debug_init()			\
	BITN_0(D_led_debug_SEL2,(D_led_debug));\
	BITN_0(D_led_debug_SEL1,(D_led_debug));\
	BITN_0(D_led_debug_SEL0,(D_led_debug));\
	BITN_0(D_led_debug_DIR,( D_led_debug));	// led_debug output

///P24是debug
#define D_led_D1			BIT4
#define D_led_D1_SEL0		P2_SEL0
#define D_led_D1_SEL1		P2_SEL1
#define D_led_D1_DIR		P2_DIR
#define D_led_D1_REV()		D_P24_REV()
#define D_led_D1_ON()		P24 = 0
#define D_led_D1_OFF()		P24 = 1
#define D_led_D1_init()	D_led_D1_OFF();\
	BITN_0(D_led_D1_SEL1,(D_led_D1));\
	BITN_0(D_led_D1_SEL0,(D_led_D1));\
	BITN_0(D_led_D1_DIR, (D_led_D1));\
	BITN_0(P2_PE, (D_led_D1));\
	BITN_1(P2_DS, (D_led_D1));\
	BITN_0(P2_OD, (D_led_D1));	//CMOS or push_Pull
///PE上拉 OD推挽输出ds= 电流增强  

///P25是debug
#define D_led_D2			BIT5
#define D_led_D2_SEL0		P2_SEL0
#define D_led_D2_SEL1		P2_SEL1
#define D_led_D2_DIR		P2_DIR
#define D_led_D2_REV()		D_P25_REV()
#define D_led_D2_ON()		P25 = 0
#define D_led_D2_OFF()		P25 = 1
#define D_led_D2_init()	D_led_D2_OFF();\
	BITN_0(D_led_D2_SEL1,(D_led_D2));\
	BITN_0(D_led_D2_SEL0,(D_led_D2));\
	BITN_0(D_led_D2_DIR, (D_led_D2));\
	BITN_0(P2_PE, (D_led_D2));\
	BITN_1(P2_DS, (D_led_D2));\
	BITN_0(P2_OD, (D_led_D2));	//CMOS or push_Pull
///PE=1上拉 OD=0推挽输出 ds=1 电流增强  


// 仿linux做一个errono的结构体 用来保存当前的错误信息

struct _s_errorno_
{
 int errono;
 char *errostr;
};

//#define D_debug_time


#ifdef  D_debug

#define D_debug_sim
#define D_debug_spi_sim

#define D_debug_time
#define D_debug_time_using
#define D_debug_sim_using	 

#define D_debug_key

#define D_debug_adc

#define D_debug_lcd


#define D_debug_flash
#endif



extern void L3_debug_led_init(void);


#endif /* end __DEBUG_LED_H */
/*****************************************************************************
**                            End Of File
******************************************************************************/