v2.0.3 添加RFID及第二路倾角

keilp/cc_as_stc02_gsm_main.uvproj

@@ -421,6 +421,11 @@
               <FileType>1</FileType>
               <FilePath>..\source\app\app_task_wdt.c</FilePath>
             </File>
+            <File>
+              <FileName>app_task_rfid.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\source\app\app_task_rfid.c</FilePath>
+            </File>
           </Files>
         </Group>
         <Group>

source/app/app_common.c

@@ -6,7 +6,6 @@
 #include "../app/app_paraid.h"
 #include "../app/app_task_relay.h"
 
-
 struct printer_maintenance_global G;
 U8 ccmodbus_len = 0;
 
@@ -69,6 +68,12 @@ void L2_register_init()
 	G.md_slaver_info[4].regnum = 0x01;
 	G.md_slaver_info[4].mask = 2;
 
+	G.md_slaver_info[5].slaver = SLAVER_ASGA03_UPDOWN_ID;	//升降倾角
+	G.md_slaver_info[5].oper = MODBUS_OPER_READ;
+	G.md_slaver_info[5].reg = 0x04;
+	G.md_slaver_info[5].regnum = 0x03;
+	G.md_slaver_info[5].mask = 2;
+
 	for(i=0;i<CCMD_SLAVER_INFO_MAX;i++)
 	{
 		G.ccmd_slaver_info[i].mask = 0;
@@ -114,6 +119,17 @@ void L2_register_init()
 	G._keyled = G._rfid = 0;
 
 	G.reset = 0;
+	G.debug = 0;
+}
+
+void L3_protocol_handler_uart0_fun(TS_PH3_ccmodbus *ccmodbus)
+{
+	switch(ccmodbus->oper)
+	{
+		case OPER_SET_DEBUG:
+			G.debug = ccmodbus->buf[0];
+			break;
+	}
 }
 
 void L3_protocol_handler_uart4_fun(U8 *pPara)

source/app/app_common.h

@@ -60,6 +60,8 @@ enum CCMODBUS_OPER
 	OPER_GPRS_HEART = 0x00,
 	// OPER_GPRS_ACK = 0x95,
 	OPER_GPRS_REPORT = 0x97,
+
+	OPER_SET_DEBUG = 0x01,
 };
 
 enum TS_485_OPER
@@ -91,12 +93,16 @@ typedef struct printer_paper_calib
 /**
  * Register Memory Map
  */ 
+#define SLAVER_RFID 0x00	//RFID发送过来的数据
+#define SLAVER_COM0 0x01	//COM0发送过来的数据
+
 #define SLAVER_DW20_ID 0x11
-#define SLAVER_ASGA03_ID 0x12
+#define SLAVER_ASGA03_ID 0x12	//称重内部倾角传感
 #define SLAVER_SHOW01_ID 0x13
 #define SLAVER_TCP_SERVER_ID 0x14
+#define SLAVER_ASGA03_UPDOWN_ID 0x15	//升降位置倾角传感
 
-#define MD_SLAVER_INFO_MAX 5
+#define MD_SLAVER_INFO_MAX 6
 #define CCMD_SLAVER_INFO_MAX 4
 
 //需要持久化的参数，不能超过72字节，否则会导致eeprom溢出
@@ -145,7 +151,10 @@ typedef struct printer_maintenance_global
 	U8 _rfid;
 	S32 pi_weight;
 	S32 total_weight;
+
+	CCAsGaInfo asga_02;
 	U8 reset;
+	U8 debug;
 }PMGlobal;
 
 //寄存器内存基地址
@@ -159,6 +168,7 @@ typedef struct printer_maintenance_global
 extern struct printer_maintenance_global G;
 extern void L2_register_init(void);
 extern void L3_protocol_handler_uart4_fun(U8 *pPara);
+extern void L3_protocol_handler_uart0_fun(TS_PH3_ccmodbus *ccmodbus);
 extern void L2_do_board_reset(void);
 extern void L2_do_gm35_reset(void);
 

source/app/app_drv.c

@@ -70,23 +70,39 @@ void L3_UARTcom4_exp_protocol(TS_Handle_0d0a *p)
 	}
 }
 
+//FF FE 05 00 00 28 FC CC	从FF开始校验
+int L3_checkCrc16(TS_PH3_ccmodbus *ccmodbus)
+{
+	U8 crc[2];
+	crc16(crc,&ccmodbus->filter1,ccmodbus->num + 3 - 2);
+	if(crc[0] == ccmodbus->buf[ccmodbus->num-2-2] && crc[1] == ccmodbus->buf[ccmodbus->num-2-1])
+	{
+		return 1;
+	}
+	return 0;
+}
+
 void L3_UARTcom0_exp_protocol(TS_Handle_PH3 *p)
 {
 	if (1 == p->ok)
 	{
-	#if 0
-		TS_PH3_ccmodbus ccmodbus;
-		byte_copy_uc((U8*)&ccmodbus,(U8*)&p->ts_ccmodbus,p->ts_ccmodbus.num + 3);
-		if(ccmodbus.buf[0] != G._rfid)	//rfid发生改变
+		if(L3_checkCrc16(&p->ts_ccmodbus))
 		{ 			
-			G.rfid = G._rfid = ccmodbus.buf[0];
-		}
-	#else
+			switch(p->ts_ccmodbus.slaver)
+			{
+			case SLAVER_RFID:
+				L0_uart0_uc('r');
+				L0_uart0_uchex(p->ts_ccmodbus.buf[0]);
 				if(p->ts_ccmodbus.buf[0] != G._rfid)	//rfid发生改变
 				{
 					G.rfid = G._rfid = p->ts_ccmodbus.buf[0];
 				}
-	#endif
+				break;
+			case SLAVER_COM0:
+				L3_protocol_handler_uart0_fun(&p->ts_ccmodbus);
+				break;
+			}
+		}
 		p->ok = 0;
 	}
 }
@@ -96,19 +112,16 @@ void L3_UARTcom3_exp_protocol(TS_Handle_PH3 *p)
 {
 	if (1 == p->ok)
 	{ 
-	#if 0
-		TS_PH3_ccmodbus ccmodbus;
-		byte_copy_uc((U8*)&ccmodbus,(U8*)&p->ts_ccmodbus,p->ts_ccmodbus.num + 3);
-		if(ccmodbus.buf[0] != G._rfid)	//rfid发生改变
+		if(L3_checkCrc16(&p->ts_ccmodbus))
 		{
-			G.rfid = G._rfid = ccmodbus.buf[0];
-		}
-	#else
+		 	L0_uart0_uc('r');
+			L0_uart0_uchex(p->ts_ccmodbus.buf[0]);
+			
 			if(p->ts_ccmodbus.buf[0] != G._rfid)	//rfid发生改变
 			{
 				G.rfid = G._rfid = p->ts_ccmodbus.buf[0];
 			}
-	#endif
+		}
 		p->ok = 0;
 	}
 }

source/app/app_task_485.c

@@ -62,7 +62,7 @@ void L3_task_485_handle(TS_485 *s)
 						G.md_slaver_info[s->slaverIndex].mask = 0;
 					}
 					
-					//TODO 这里可以根据modbus协议让代码通用，
+					//TODO 这里可以根据modbus协议让代码通用
 					if(s->pAckPkg->oper == MODBUS_OPER_READ)
 					{
 						if(s->pAckPkg->salver == G.md_slaver_info[0].slaver)
@@ -105,6 +105,12 @@ void L3_task_485_handle(TS_485 *s)
 								}
 							}
 						}
+						else if(s->pAckPkg->salver == G.md_slaver_info[5].slaver)
+						{
+							G.asga_02.xaxis = (U16)(s->pAckPkg->buf[1]) << 8 | (U16)(s->pAckPkg->buf[2]);
+							G.asga_02.yaxis = (U16)(s->pAckPkg->buf[3]) << 8 | (U16)(s->pAckPkg->buf[4]);
+							G.asga_02.zaxis = (U16)(s->pAckPkg->buf[5]) << 8 | (U16)(s->pAckPkg->buf[6]);
+						}
 					}
 				}
 			}

source/app/app_task_gm35.c

@@ -44,7 +44,10 @@ U8 * _cipsend_hex(U8 len)
 void L3_gm35_send_str(U8 *str)
 {
 	L0_uart4_sendstr(str);
+	if(G.debug)
+	{
 		L0_uart0_sendstr(str);
+	}
 }
 
 //将数据放入gm35待发送缓冲区
@@ -52,7 +55,20 @@ void L3_gm35_send_data(U8 *buf , U8 len)
 {
 	L3_gm35_send_str(_cipsend_hex(len));
 	L0_uart4_sendArray(buf,len);
+	if(G.debug)
+	{
 		L0_uart0_sendArray(buf,len);
+	}
+}
+
+void L3_gm35_rcv_data(U8* buf,U8 num)
+{
+	if(G.debug)
+	{
+		L0_uart0_sendstr("ATRCV=");
+		L0_uart0_uchex(num);
+		L0_uart0_sendArray(buf,num);
+	}
 }
 //------------------------------------------------------ gm35 tasks --------------------------------
 
@@ -138,6 +154,7 @@ void L2_task_gm35_daemon_handle(struct _s_task_gm35_gprs_ *s)
 			P55 = 1;	//灯灭
 			if(s_nos_tick.t_1s - g_at_send_status.tcp_close_stmp > TCP_MAX_DISCONN)
 			{
+				L0_uart0_uc('>');
 				if(++g_at_send_status.gm35_reboot_times >= TCP_MAX_GM35_REBOOT_TIMES)
 				{
 					L2_do_board_reset();

source/app/app_task_gm35.h

@@ -85,6 +85,7 @@ extern struct _s_task_gm35_gprs_ s_task_connect_gprs;
 extern void L3_task_gm35_core_init(void);
 extern void L3_task_gm35_core_handle(void);
 extern void L3_gm35_send_data(U8 *buf , U8 len);
+extern void L3_gm35_rcv_data(U8* buf,U8 num);
 
 #endif 
 

source/app/app_task_rfid.c

@@ -0,0 +1,43 @@
+#include "app_task_rfid.h"
+#include "../msp/uart0.h"
+#include "../msp/uart3.h"
+
+#define MODBUS_SLAVER_RETRY_MAX_TIME 3
+
+TS_rfid ts_rfid;
+
+void L3_task_rfid_init(void)
+{
+	L1_task_init(&ts_rfid.task);
+	L3_task_s_go(ts_rfid,D_task_init);
+}
+
+U8 rfid_start_pkg[] = {0xBB,0x00,0x27,0x00,0x03,0x22,0xFF,0xFF,0x4A,0x7E};
+U8 rfid_stop_pkg[] = {0xBB,0x00,0x28,0x00,0x00,0x28,0x7E};
+
+void L1_enable_rfid()
+{
+	L0_uart0_sendArray(rfid_start_pkg,10);
+	L0_uart3_sendArray(rfid_start_pkg,10);
+}
+
+void L1_disable_rfid()
+{
+	L0_uart0_sendArray(rfid_stop_pkg,7);
+	L0_uart3_sendArray(rfid_stop_pkg,7);
+}
+
+#define D_task_rfid_send 0x51
+void L3_task_rfid_handle(TS_rfid *s)
+{
+  TTSS_Task_init();
+		L2_task_go(D_task_rfid_send);
+		
+	TTSS_Task_step(D_task_rfid_send)
+		L1_enable_rfid();
+		L2_task_go_Tdelay(D_task_rfid_send, D_Tdelay_10s);
+		
+	TTSS_Task_end();
+}
+
+

source/app/app_task_rfid.h

@@ -0,0 +1,17 @@
+#ifndef APP_TASK_RFID
+#define APP_TASK_RFID
+
+#include "../ctask/task.h"
+#include "app_common.h"
+
+typedef struct
+{
+	TS_task task;
+}TS_rfid;
+
+extern TS_rfid ts_rfid;
+
+extern void L3_task_rfid_init();
+extern void L3_task_rfid_handle(TS_rfid *s);
+
+#endif

source/app/app_task_tcp.c

@@ -59,10 +59,7 @@ void L3_task_tcp_handle(TS_tcp *s)
 			g_at_send_status.tcp_last_recv_stmp = s_nos_tick.t_1s;
 
 			s->pAckPkg = (TS_PH3_ccmodbus*)(s_uart4_tcp_rec.sp);
-			L0_uart0_sendstr("ATRCV=");
-			L0_uart0_uchex(s->pAckPkg->num + 3);
-			L0_uart0_sendArray((U8*)s->pAckPkg,s->pAckPkg->num + 3);
-			
+			L3_gm35_rcv_data((U8*)s->pAckPkg,s->pAckPkg->num + 3);
 			if(s->pAckPkg->slaver == G.ccmd_slaver_info[s->slaverIndex].slaver)
 			{
 				s->ackFlag = 1;

source/app/app_task_wdt.c

@@ -9,6 +9,7 @@ void L3_task_wdt_init(void)
 {
 	L1_task_init(&s_task_wdt.task);
 	L3_task_s_go(s_task_wdt,D_task_init);
+	L0_wdt_init();
 }
 
 #define TTSS_TASK_WDT_STP_01 0x1

source/app/main.c

@@ -93,12 +93,14 @@ void L0_main_init(void)
 	L3_task_wdt_init();	//看门狗任务初始化
 #endif
 
+	L3_task_wdt_init();
 	L2_gm35_init();
 	L3_task_gm35_core_init();
 	L3_task_485_init();	//485轮询任务初始化
 	L3_task_485_control_init();
 	L3_task_tcp_init();	//485轮询任务初始化
 	L3_task_tcp_control_init();
+	L3_task_rfid_init();//rfid任务初始化
 }
 
 //===============================================
@@ -140,6 +142,7 @@ void main(void)
 		L3_task_wdt_handle(&s_task_wdt);
 		
 		//串口0,3 RFID接收
+		L3_task_rfid_handle(&ts_rfid);
 		L3_UARTcom0_exp_protocol(&s_uart0_rec);
 		L3_UARTcom3_exp_protocol(&s_uart3_rec);
 

source/app/main.h

@@ -83,6 +83,7 @@
 #include "../app/app_task_tcp.h"
 #include "../app/app_task_tcp_control.h"
 #include "../app/app_task_relay.h"
+#include "../app/app_task_rfid.h"
 #include "../app/app_common.h"
 #include "../app/app_paraid.h"
 

source/msp/UART3.c

@@ -67,20 +67,21 @@ struct _s_uart3_send_buf_ s_uart3_send_depot;
 
 void L0_uart3_init(void)	//57600
 {
-#if 0
-	S3CON = 0x10;		//8位数据,可变波特率
-	S3CON &= 0xBF;		//串口3选择定时器2为波特率发生器
-	AUXR |= 0x04;		//定时器2时钟为Fosc,即1T
-	T2L = 0xD0;		//设定定时初值
-	T2H = 0xFF;		//设定定时初值
-	AUXR |= 0x10;		//启动定时器
-#endif
+#if 0 //57600
 	S3CON = 0x10;		//8位数据,可变波特率
 	S3CON |= 0x40;		//串口3选择定时器3为波特率发生器
 	T4T3M |= 0x02;		//定时器3时钟为Fosc,即1T
 	T3L = 0xD0;		//设定定时初值
 	T3H = 0xFF;		//设定定时初值
 	T4T3M |= 0x08;		//启动定时器3
+#else	//115200
+	S3CON = 0x10;		//8位数据,可变波特率
+	S3CON |= 0x40;		//串口3选择定时器3为波特率发生器
+	T4T3M |= 0x02;		//定时器3时钟为Fosc,即1T
+	T3L = 0xE8;		//设定定时初值
+	T3H = 0xFF;		//设定定时初值
+	T4T3M |= 0x08;		//启动定时器3
+#endif
 	D_uart3_ES_INT_OPEN(); //打开串口中断 
 }
 

source/tpc/tpc_ccmodbus.c

@@ -146,8 +146,9 @@ void L1_s2b_PH3(TS_Handle_PH3 *p)// reentrant
 			}
 			if(p->num >= p->max)
 			{
-				crc16(p->crc,&p->ts_ccmodbus.slaver,p->ts_ccmodbus.num - 2);
-				if(/*p->crc[0] == p->ts_ccmodbus.crc[1] && p->crc[1] == p->ts_ccmodbus.crc[0]*/ 1)
+				//crc16(p->crc,&p->ts_ccmodbus.slaver,p->ts_ccmodbus.num - 2);
+				//if(p->crc[0] == p->sp[p->num-1] && p->crc[1] == p->sp[p->num])
+				if(1)
 				{
 					if (p->ok != 1)
 					{