fixed: 修正eeprom block bug

source/app/common.c

@@ -29,7 +29,7 @@ void L3_eeprom_read_param()
 		}
 	}
 #endif
-	if(L1_eep_read_block(D_EEP_PARAM_IN_SECTOR, D_EEP_PARAM_IN_BLOCK, D_EEP_PARAM_BLOCK_SIZE, (U8*)&G.p, NULL) == 0)
+	if(L1_eep_read_block(D_EEP_PARAM_IN_SECTOR, D_EEP_PARAM_IN_BLOCK, D_EEP_SECTOR_BLOCK_SIZE, (U8*)&G.p, NULL) == 0)
 	{
 		//L0_uart0_sendstr("e2p read success");
 		return;
@@ -51,7 +51,7 @@ void L3_eeprom_persist_param()
 	L0_Iap_Erase(EEP_PARAM_ADDR);
 	L0_Iap_Program_array(EEP_PARAM_ADDR, (U8*)&eep_param, 2 + dlen + 2);
 #endif
-	if(L1_eep_write_block(D_EEP_PARAM_IN_SECTOR, D_EEP_PARAM_IN_BLOCK, D_EEP_PARAM_BLOCK_SIZE, (U8*)&G.p,sizeof(G.p),TRUE) == 0)
+	if(L1_eep_write_block(D_EEP_PARAM_IN_SECTOR, D_EEP_PARAM_IN_BLOCK, D_EEP_SECTOR_BLOCK_SIZE, (U8*)&G.p,sizeof(G.p),TRUE) == 0)
 	{
 		//L0_uart0_sendstr("e2p write success"); 
 		return;
@@ -109,7 +109,7 @@ int L3_mcu_id_ok(void)
 	U8 i = 0;
 
 	//1. 获取eeprom中存储的enc信息
-	if(L1_eep_read_block(D_EEP_ENC_IN_SECTOR, D_EEP_ENC_IN_BLOCK, D_EEP_ENC_BLOCK_SIZE, (U8*)&eep_enc,NULL) == 1)
+	if(L1_eep_read_block(D_EEP_ENC_IN_SECTOR, D_EEP_ENC_IN_BLOCK, D_EEP_SECTOR_BLOCK_SIZE, (U8*)&eep_enc,NULL) == 1)
 	{
 		//L0_uart0_sendstr("e2p read enc failed"); 
 		return 0;

source/bsp/bsp_config.h

@@ -116,13 +116,13 @@
 	//EEP User Defined 参数区存储配置	
 	#define D_EEP_PARAM_IN_SECTOR 1		//eeprom参数区扇区地址，从0开始
 	#define D_EEP_PARAM_IN_BLOCK 0		//eeprom参数区数据块地址，从0开始
-	#define D_EEP_PARAM_BLOCK_SIZE 	(D_EEP_SECTOR_BLOCK_SIZE)	//参数区每个块大小，必须：D_EEP_PARAM_BLOCK_SIZE<=D_EEP_SECTOR_BLOCK_SIZE!!!，因为eeprom.h中是按照D_EEP_SECTOR_BLOCK_SIZE分配的buf
-	#define D_EEP_PARAM_BLOCK_NUM 	(D_EEP_SECTOR_SIZE / D_EEP_PARAM_BLOCK_SIZE) //每个扇区数据块的数量
+	//#define D_EEP_PARAM_BLOCK_SIZE 	(D_EEP_SECTOR_BLOCK_SIZE)	//参数区每个块大小，必须：D_EEP_PARAM_BLOCK_SIZE<=D_EEP_SECTOR_BLOCK_SIZE!!!，因为eeprom.h中是按照D_EEP_SECTOR_BLOCK_SIZE分配的buf
+	//#define D_EEP_PARAM_BLOCK_NUM 	(D_EEP_SECTOR_SIZE / D_EEP_PARAM_BLOCK_SIZE) //每个扇区数据块的数量
 	//EEP 加密区存储配置
 	#if(D_CODE_ENCRYPTION_TYPE == TYPE_ENCRYPTION_ENABLE)
 	#define D_EEP_ENC_IN_SECTOR 0 		//eeprom加密区扇区地址，从0开始
 	#define D_EEP_ENC_IN_BLOCK 0 		//eeprom加密区数据块地址，从0开始
-	#define D_EEP_ENC_BLOCK_SIZE 	0x20	//ENC_BLOCK_SIZE必须与加密程序中的ENC_BLOCK_SIZE匹配，此处不建议修改，如需修改，请同时修改加密程序
+	//#define D_EEP_ENC_BLOCK_SIZE 	0x20	//ENC_BLOCK_SIZE必须与加密程序中的ENC_BLOCK_SIZE匹配，此处不建议修改，如需修改，请同时修改加密程序
 	#endif
 #elif
 	xxx