ttss_weight/source/app/main.c

#include "main.h"
#include "asp_lowpower.h"

void L0_RTC_init(void)
{
	P_SW2 = 0x80;
	//	XOSCCR =0;
	///HIRCCR = 0;
	IRC32KCR = 0x80;							//启动内部32K IRC
	while (!(IRC32KCR & 1));					//等待时钟稳定
	CLKDIV = 0x00;								//时钟不分频
	///   CLKSEL = 0x03;							   //选择内部32K
	
	RTCCFG = 3;
	///RTCCFG |= 0x02; //选择内部 32K 作为 RTC 时钟源 RTCCFG | = 0x02; / / Select internal 32K as RTC, clock source
	RTCCR = 1;
	printf3("\r\n %X %X:%X",(int)(DAY), (int)(MIN), (int)(SEC));
	
	D_stdIO_P2(BITN4);D_P24_REV();
	Lc_delay_ms(500);
	
	printf3("\r\n %X %X:%X",(int)(DAY), (int)(MIN), (int)(SEC));
	Lc_delay_ms(200);D_stdIO_P2(BITN4);D_P24_REV();
	Lc_delay_ms(500);
	printf3("\r\n %X %X:%X",(int)(DAY), (int)(MIN), (int)(SEC));
	Lc_delay_ms(200);D_stdIO_P2(BITN4);D_P24_REV();
	Lc_delay_ms(500);
	printf3("\r\n %X %X:%X",(int)(DAY), (int)(MIN), (int)(SEC));
	Lc_delay_ms(200);
}

void L0_main_initled(void)
{
	D_LED1_OFF();

	D_LED2_ON();

	TTSS_run_times(6)
	{
		D_LED1_REV();
		D_LED2_REV();
		Lc_delay_ms(300);
	}
}

void L0_main_init(void)
{
	int r = 0;
	Lc_delay_ms(200); 
	L0_main_initled();		//指示灯
	CLKDIV = 0;   	  		//不分频，使用focs

	L0_uart1_open();		//打开串口1
	L0_uart2_open();		//打开串口2

	L3_debug_drv_init();	//未调用
	L1_task_tick_init();	//TTSS-tick初始化
	L0_timer0_Init();		//定时器0初始化
	ET0 = 1;				//允许定时器中断T0	

	printf1("\r\nD_sys_MainFre	%ld",D_sys_MainFre);

	r = L3_S_init();
	printf1("\r\nL3_S_init	%d",r);
}



TS_adc_SPara_ TS_adc_SPara[D_ADC_CHANNEL_NUM]=
{
	'A',				  //0	1		u8 rev1;
	0,					  //2	3		u8 ch;
	D_ch1_wantline,		  //vU16 	wantline;	///固定的硬件参数（例如称重中的0kg，压力中的0压力）时想要输出的adc的值
	D_ch1_out1_offset,	  //3	4		vU16 offset;
	2,					  //4	5		vU8 ashift;		///移动的位数 1-2 2-4 3-8 4-16
	5,					  //5	6		vU8 bshift;		///移动的位数 1-2 2-4 3-8 4-16
	  
	'A',				  //0	1		u8 rev1;
	1,					  //2	3		u8 ch;
	D_ch1_wantline,		  //vU16 	wantline;	///固定的硬件参数（例如称重中的0kg，压力中的0压力）时想要输出的adc的值
	D_ch2_out1_offset,	  //3	4		vU16 offset;
	2,					  //4	5		vU8 ashift;		///移动的位数 1-2 2-4 3-8 4-16
	5,					  //5	6		vU8 bshift;		///移动的位数 1-2 2-4 3-8 4-16
	  
	'A',				  //0	1		u8 rev1;
	2,					  //2	3		u8 ch;
	D_ch1_wantline,		  //vU16 	wantline;	///固定的硬件参数（例如称重中的0kg，压力中的0压力）时想要输出的adc的值
	D_ch3_out1_offset,	  //3	4		vU16 offset;
	2,					  //4	5		vU8 ashift;		///移动的位数 1-2 2-4 3-8 4-16
	5,					  //5	6		vU8 bshift;		///移动的位数 1-2 2-4 3-8 4-16
	  
		  
	'A',				  //0	1		u8 rev1;
	3,					  //2	3		u8 ch;
	D_ch1_wantline,		  //vU16 	wantline;	///固定的硬件参数（例如称重中的0kg，压力中的0压力）时想要输出的adc的值
	D_ch4_out1_offset,	  //3	4		vU16 offset;
	2,					  //4	5		vU8 ashift;		///移动的位数 1-2 2-4 3-8 4-16
	5					  //5	6		vU8 bshift;		///移动的位数 1-2 2-4 3-8 4-16


};
//===============================================
//主函数
//===============================================
void main(void) 
{

	u16 a= 0;
	char d[9]={0xab};

	L0_main_init();

	L3_task_weight_init();
	
	TTSS_run_every_init(s_nos_tick.stamp,10);

	printfs("\r\3 main while13\r\n");

	while(1)
	{
		if(1 == s_nos_tick.t1s_heartbeat)
		{
			s_nos_tick.t1s_heartbeat = 0;
			// L1_uartD_uc('.');
			D_LED1_REV();
			// L0_uart2_uc('Q');
			// L0_uart2_0d0a(); 		
			// L0_uart2_ul(0XAABBCCDD);
			// L0_uart1_ul(0XAABBCCDD);
			// L0_uart2_0d0a();
		}	
		
		if(L2_debug_ONcomand())
		{
			L3_weight_ONdebug(D_cmd_filter_weight);
		}
		L3_task_weight_handler(&tst_weight);
		
		// L0_uart1_us(0x1234);
	}
}