调试所有led

source/.vscode/settings.json

@@ -0,0 +1,5 @@
+{
+    "files.associations": {
+        "UART0.C": "cpp"
+    }
+}

source/app/main.c

@@ -75,7 +75,7 @@ stc5ac32s
 ************************************************/
 //===============================================
 //寄存器头文件
-//===============================================			
+//===============================================
 
 #include "main.h"
 
@@ -109,6 +109,17 @@ void L0_main_init(void)
 //===============================================
 void main(void)
 {
+	U32 c = 0;
+	L0_board_config();
+	while(1)
+	{
+		LED0 = 1;
+		c = 0x100000;
+		while(c--){}
+		LED0 = 1;
+		c = 0x100000;
+		while(c--){}
+	}
 	//初始化
 	L0_main_init();
 	//验证加密信息
@@ -120,24 +131,25 @@ void main(void)
 		{
 			s_nos_tick.t1s_heatbeart = 0;
 			LED0 ^= 1;
+			L0_uart0_uc('.');
 		}
 		
 		//L1_ADS1213_main();
 		
 		//单路采集滤波
-		L3_task_adc_handler(0);
-		L3_task_adc_handler(1);
-		L3_task_adc_handler(2);
-		L3_task_adc_handler(3);
+		//L3_task_adc_handler(0);
+		//L3_task_adc_handler(1);
+		//L3_task_adc_handler(2);
+		//L3_task_adc_handler(3);
 		
 		//显示
-		L3_task_adc_filter_show(&ts_adc_blur_show);
+		//L3_task_adc_filter_show(&ts_adc_blur_show);
 		
 		//寄存器值监控
-		L3_task_reglisten_handle(&s_task_reglisten);
+		//L3_task_reglisten_handle(&s_task_reglisten);
 
 		//输出,响应485协议
-		L3_task_modbus_handler(&s_uart0_rec);
+		//L3_task_modbus_handler(&s_uart0_rec);
 
 		//调试输出
 		//L3_task_debug(&_s_task_debug);

source/bsp/bsp_config.c

@@ -56,20 +56,16 @@ void L0_board_config(void)
 	BITN_0(P5M1,BITN5);BITN_1(P5M0,BITN5);
 
 	//LED
-	D_stdIO_P1(BITN7);
-	D_stdIO_P5(BITN4);
+	D_stdIO_P0_ALL();
+	D_stdIO_P1_ALL();
+	D_stdIO_P2_ALL();
+	D_stdIO_P3_ALL();
+	D_stdIO_P4_ALL();
 
 	//IO
-	D_stdIO_P1(BITN0);
-	D_stdIO_P1(BITN1);
-	D_stdIO_P1(BITN2);
-	D_stdIO_P1(BITN6);
-	D_stdIO_P3(BITN2);
-	D_stdIO_P3(BITN3);
-	D_stdIO_P3(BITN4);
-	D_stdIO_P3(BITN5);
-	D_stdIO_P3(BITN6);
-	D_stdIO_P3(BITN7);
+	BLED0 = BLED1 = BLED2 = BLED3 = BLED4 = BLED5 = BLED6 = 1;
+	BLED7 = BLED8 = BLED9 = BLED10 = BLED11 = BLED12 = BLED13 = 0;
+	LED0 = 1;
 
 	#if (TYPE_WDT_ENABLE == D_WDT_STATUS)
 	WDT_CONTR = 0x27;     //使能看门狗,22M时钟下溢出时间约为5s，请注意添加喂狗程序