////////////////////////////////////////////////////////////////////////////  
///@copyright  Copyright (c) 2018, 传控科技 All rights reserved.  
///-------------------------------------------------------------------------  
/// @file            bsp_drv.c
/// @brief           bsp @ driver config
///-------------------------------------------------------------------------  
/// @version		1.0  
/// @author			CC 
/// @date			20180331
/// @note			cc_AS_stc02
//////////////////////////////////////////////////////////////////////////////

#include "app_drv.h"	
#include "../clib/clib.h"
#include "../app/app_common.h"
#include "../app/app_task_485.h"
#include "../app/app_task_gm35.h"
#include "../msp/uart3.h"

/// reg.H,reg.L data0 data1 data2;
/// (reg.HL)=data0    (reg.HL+1)=data1    (reg.HL+2)=data2    (reg.HL+3)=data3   
/// 0x0f  0----14 15 
#if 0
TS_drv_ ts_drv[TS_DRV_MAX]=
{
	0x0e,NULL,	/// FE 01 02 03 04
	0x12,NULL,	//uart0 reply
	0x0d,NULL,	//433 camera	//fd 01 02 03 06
	0x99,NULL,	//a9 gprs
	0x00,NULL,
};
#endif

#if 0

void L3_task_a9_rcv_handle(TS_Handle_PH3 *p)
{
	if (1 == p->ok)
	{
		TS_PH3_ccmodbus ccmodbus;
		byte_copy_uc((U8*)&ccmodbus,(U8*)&p->ts_ccmodbus,p->ts_ccmodbus.num + 3);
		p->ok = 0;

		g_at_send_status.tcp_last_recv_stmp = s_nos_tick.t_1s;		
		L3_protocol_handler_uart0_fun(&ccmodbus,1);
	}
}
#endif

void L3_UARTcom4_exp_protocol(TS_Handle_0d0a *p)
{
	if (1 == p->ok )
	{
	#if 0
		U8 array[D_s_SSTR_0D0A_len+1];
		U8 num = p->buf[0];
		byte_copy_uc(array,p->buf+1,num);

		array[num] = 0;
		L3_protocol_handler_uart4_fun(array);
	#else
		if(p->buf[0] > D_s_SSTR_0D0A_len)
		{
			p->buf[0] = D_s_SSTR_0D0A_len;
		}
		p->buf[p->buf[0]] = 0;
		L3_protocol_handler_uart4_fun(p->buf + 1);
	#endif
		p->ok = 0;
	}
}


void L3_UARTcom3_exp_protocol(TS_Handle_PH3 *p)
{
	if (1 == p->ok)
	{
	#if 0
		TS_PH3_ccmodbus ccmodbus;
		byte_copy_uc((U8*)&ccmodbus,(U8*)&p->ts_ccmodbus,p->ts_ccmodbus.num + 3);
		if(ccmodbus.buf[0] != G._rfid)	//rfid发生改变
		{
			G.rfid = G._rfid = ccmodbus.buf[0];
		}
	#else
		if(p->ts_ccmodbus.buf[0] != G._rfid)	//rfid发生改变
		{
			G.rfid = G._rfid = p->ts_ccmodbus.buf[0];
		}
	#endif
		p->ok = 0;
	}
}


void L3_UARTcom0_exp_protocol(TS_Handle_PH3 *p)
{
	if (1 == p->ok)
	{
		p->ok = 0;
	}
}