source/app/app_common.c

@@ -15,19 +15,21 @@ U32 code key_rfid_map[KEY_RFID_MAP_SIZE] =
 	/// key,	rfid
 	//0x01,1,	///S1			///key_map[0]  key_map[1]  
 	//0x02,11,  ///S2			///key_map[n]	 key_map[n+1]  
-	0x03,0x01000001,     ///呼叫  
-	0x04,0x02000001,    ///分诊
-	0x08,0x01000003,     ///一线
-	0x09,0x01000004,    ///采血
-	0x0a,0x01000005,     ///心电
-	0x0B,0x02000003,    ///CT
-	0x0f,0x01000007,     ///二线
-	0x10,0x01000008,    ///谈话
-	0x11,0x01000009,     ///签字
-	0x12,0x0100000A,    ///团注
-	0x16,0x02000005,     ///介入
-	0x17,0x0100000C,    ///置鞘（穿刺）
-	0x18,0x0100000D,     ///病房
+	0x02,0x02000020,     ///呼叫 S2 
+	0x12,0x02000001,    ///分诊 S12
+	0x03,0x03010301,     ///一线 S3 医生1
+	0x03,0x03010302,     ///一线 S3 医生2
+	0x16,0x02000059,    ///采血 S13
+	0x04,0x02000025,     ///心电 S4
+	0x17,0x02000003,    ///CT S14
+	0x08,0x03020301,     ///二线 S5 医生1
+	0x08,0x03020302,     ///二线 S5 医生2
+	0x18,0x01000008,    ///谈话 S15
+	0x09,0x01000009,     ///签字 S6
+	0x1D,0x02000060,    ///团注 S16
+	0x0A,0x02000005,     ///介入 S7
+	0x1F,0x0100000C,    ///置鞘（穿刺） S17
+	0x0B,0x02000023,     ///病房 S8
 	//0x1d,9,     ///S16
 	//0x1f,10,    ///S17
 	//0x1e,0     ///	清零按键，无需亮�
@@ -64,7 +66,7 @@ void L2_register_init()
 {
     U8 i = 0;
 	G.p.slaverId = 0x10;
-	G.p.wisdom_car_no = 0x92;	//第一台车91,第二台车92
+	G.p.wisdom_car_no = 0x93;	//第一台车91,第二台车92
 	G.p.thrombolytic_ratio = 9;	//0.9
 	G.p.bolus_ratio = 1;	//0.9
 	G.p.hold_ratio = 9;		//0.1
@@ -76,9 +78,9 @@ void L2_register_init()
 	G.asga.xaxis = G.asga.yaxis = G.asga.zaxis = 0;
 	G.rfidval = G.rfidHospitalNo = 0;
 
-	for(i=0;i<4;i++)
+	for(i=0;i<6;i++)
 	{
-		G.weight[i] = 0;
+		G.rfid[i] = 0;
 	}
 
 	for(i=0;i<MD_SLAVER_INFO_MAX;i++)
@@ -162,7 +164,7 @@ void L2_register_init()
 	G.ccmd_slaver_info[3].slaver = SLAVER_TCP_SERVER_ID;	//�务�
 	G.ccmd_slaver_info[3].oper = MODBUS_OPER_WRITE_M;
 	G.ccmd_slaver_info[3].reg = 0x10;
-	G.ccmd_slaver_info[3].regnum = 0x13;
+	G.ccmd_slaver_info[3].regnum = 0x0B;
 	G.ccmd_slaver_info[3].bytes = G.ccmd_slaver_info[3].regnum * 2;
 	G.ccmd_slaver_info[3].buf = (U8*)&G.jing_weight;
 	G.ccmd_slaver_info[3].mask = 0;

source/app/app_drv.c

@@ -45,7 +45,7 @@ void L3_task_a9_rcv_handle(TS_Handle_PH3 *p)
 		L3_protocol_handler_uart0_fun(&ccmodbus,1);
 	}
 }
-#endif
+
 
 
 U8 array[D_s_SSTR_0D0A_len+1];
@@ -69,6 +69,30 @@ void L3_UARTcom4_exp_protocol(TS_Handle_0d0a *p)
 	#endif
 	}
 }
+#endif
+
+void L3_UARTcom4_exp_protocol(TS_Handle_PH3 *p)
+{
+	if (1 == p->ok ) //收到消息
+	{
+		if(L3_checkCrc16(&p->ts_ccmodbus)) //CRC校验
+		{
+			if(p->ts_ccmodbus.slaver == G.p.wisdom_car_no )  //平车ID
+			{
+				switch(p->ts_ccmodbus.oper) //操作码0x10
+				case MODBUS_OPER_WRITE_M:
+					
+					
+				L3_protocol_handler_uart4_fun(&p->ts_ccmodbus);
+			}
+		}
+		g_at_send_status.gprs_last_recv_stmp = s_nos_tick.t_1s;
+		L3_protocol_handler_uart4_fun(p->buf+1);
+		p->ok = 0;
+	
+	}
+}
+
 
 //FF FE 05 00 00 28 FC CC	从FF开始校验
 int L3_checkCrc16(TS_PH3_ccmodbus *ccmodbus)

source/app/app_task_485.c

@@ -98,7 +98,7 @@ void L3_task_485_handle(TS_485 *s)
 						//G.rfid = G._keyled;
 						U32 rfid = key_rfid_map_out(G._keyled);
 						G.rfid[0] = D_CAR_HOSPITAL_NO >> 8 & 0xFF;
-						G.rfid[0] = D_CAR_HOSPITAL_NO >> 0 & 0xFF;;
+						G.rfid[1] = D_CAR_HOSPITAL_NO >> 0 & 0xFF;;
 						G.rfid[2] = rfid >> 24 & 0xFF;
 						G.rfid[3] = rfid >> 16 & 0xFF;
 						G.rfid[4] = rfid >> 8 & 0xFF;

source/app/app_task_gm35.h

@@ -24,9 +24,8 @@
 #define AT_INS_CCID			"AT+CCID\r\n"	//SIM卡查询指令
 #define AT_INS_CREG			"AT+CREG?\r\n"	//网络查询指令
 #define AT_INS_GPRS			"AT+CGATT=1;+CGDCONT=1,\"IP\",\"CMNET\";+CGACT=1,1\r\n"	//GPRS操作指令
-#define AT_INS_CIPSTART 	"AT+CIPSTART=\"TCP\",\"www.tall.wiki\",8195\r\n"
-//#define AT_INS_CIPSTART 	"AT+CIPSTART=\"TCP\",\"weizezhao.imwork.net\",49809\r\n"	//连接服务器
-//#define AT_INS_CIPSTART 	"AT+CIPSTART=\"TCP\",\"test.tall.wiki\",49000\r\n"	//连接服务器
+//#define AT_INS_CIPSTART 	"AT+CIPSTART=\"TCP\",\"www.tall.wiki\",8195\r\n"
+#define AT_INS_CIPSTART 	"AT+CIPSTART=\"TCP\",\"test.tall.wiki\",38195\r\n"	//连接服务器
 #define AT_INS_CIPSEND		"AT+CIPSEND\r\n"	//发送数据
 #define AT_INS_CLOSED		"AT+CIPCLOSE\r\n"	//主动关闭连接
 #define AT_INS_CIPSTATUS	"AT+CIPSTATUS\r\n"	//查询连接状态

source/app/app_task_rfid.c

@@ -14,8 +14,8 @@ void L3_task_rfid_init(void)
 
 U8 rfid_start_pkg[] = {0xBB,0x00,0x27,0x00,0x03,0x22,0xFF,0xFF,0x4A,0x7E};
 U8 rfid_stop_pkg[] = {0xBB,0x00,0x28,0x00,0x00,0x28,0x7E};
-U8 newrfid_start_pkg[] = {0xA0,0x0D,0x01,0x8A,0x00,0x32,0x01,0x32,0x02,0x32,0x03,0x32,0x00,0xFA,0x00};
-U8 newrfid_stop_pkg[] = {0xA0,0x04,0x01,0x74,0x00,0xE7};
+//U8 newrfid_start_pkg[] = {0xA0,0x0D,0x01,0x8A,0x00,0x32,0x01,0x32,0x02,0x32,0x03,0x32,0x00,0xFA,0x00};
+//U8 newrfid_stop_pkg[] = {0xA0,0x04,0x01,0x74,0x00,0xE7};
 
 
 void L1_enable_rfid()
@@ -23,7 +23,7 @@ void L1_enable_rfid()
 	//L0_uart0_sendArray(rfid_start_pkg,10);
 	//L0_uart3_sendArray(rfid_start_pkg,10);
 	//L0_uart0_sendArray(newrfid_start_pkg,15);
-	L0_uart3_sendArray(newrfid_start_pkg,15);
+	L0_uart3_sendArray(rfid_start_pkg,15);
 }
 
 void L1_disable_rfid()
@@ -31,7 +31,7 @@ void L1_disable_rfid()
 	//L0_uart0_sendArray(rfid_stop_pkg,7);
 	//L0_uart3_sendArray(rfid_stop_pkg,7);
 	//L0_uart0_sendArray(newrfid_stop_pkg,6);
-	L0_uart3_sendArray(newrfid_stop_pkg,6);
+	L0_uart3_sendArray(rfid_stop_pkg,6);
 }
 
 #define D_task_rfid_send 0x51

source/app/app_task_tcp.c

@@ -40,11 +40,14 @@ void L3_task_tcp_handle(TS_tcp *s)
 		}
 		else
 		{
+			P55 = 0; 
 			L2_task_go(D_task_tcp_switch_next_slaver);
 		}
 		
 	TTSS_Task_step(D_task_tcp_send_modbus_pkg)			//发送包
-		L3_gm35_send_data((U8*)&s->loopPkg,s->pkglen);
+		//L3_gm35_send_data((U8*)&s->loopPkg,s->pkglen);
+		L0_uart4_sendArray((U8*)&s->loopPkg, s->pkglen);
+		L0_uart0_sendArray((U8*)&s->loopPkg, s->pkglen);
 		s->sendStamp = s_nos_tick.t_1s;
 		if(G.ccmd_slaver_info[s->slaverIndex].mask == 1)
 		{

source/app/app_task_tcp_control.c

@@ -32,7 +32,7 @@ void L3_task_tcp_control_handle(TS_tcp_control *s)
 		L2_task_go(D_task_tcp_control_02);
 
 	TTSS_Task_step(D_task_tcp_control_02)
-		if(g_at_send_status.conn_ok)
+		if(/*g_at_send_status.conn_ok*/1)
 		{
 			//3s一次发送数据包
 			if(s_nos_tick.t_1s - ts_tcp_control.tcp_send_stmp >= 3)

source/app/main.c

@@ -125,7 +125,7 @@ void main(void)
 	//-----------------------------------------------
 	//系统主循环
 	//-----------------------------------------------
-
+	P55 = 1;
 	while(9)
 	{
 		if(1 == s_nos_tick.t1s_heatbeart)
@@ -160,7 +160,7 @@ void main(void)
 		L3_UARTcom3_exp_protocol(&s_uart3_rec);
 
 		//gm35维持连接
-		L3_task_gm35_core_handle();
+		//L3_task_gm35_core_handle();
 
 		//解析串口4协议(gsm模块收到的at响应消息+服务器发送消息)
 		L3_UARTcom4_exp_protocol(&s_uart4_at_rec);

source/bsp/bsp_config.c

@@ -230,7 +230,7 @@ void L1_s2b_gm35(unsigned char sbufreg)
 {
 	s_uart4_tcp_rec.reg = sbufreg;
 	L1_s2b_PH3(&s_uart4_tcp_rec);
-	
+#if 0	
 	if(0 == s_uart4_tcp_rec.head)
 	{
 		s_uart4_at_rec.reg = sbufreg;
@@ -240,6 +240,7 @@ void L1_s2b_gm35(unsigned char sbufreg)
 	{
 		s_uart4_at_rec.head = 0;
 	}
+#endif
 }
 
 void L1_uart_tpc_config(void)