/*****************************************************************************
 *   uart.h:  Header file for NXP LPC17xx Family Microprocessors
 *
 *   Copyright(C) 2017,SensorControl
 *   All rights reserved.
 *
 *   History
 *   2009.05.27  ver 1.00    Prelimnary version, first Release
 *2017.01.10  ver 1.10    rename tick.h  tick.c
 2019.03.11  ver 1.30    定时时间更改为25ms 解决串口接收受干扰的情况 
****************************************************************************************/
/*****************************************************
*============================================================================
*			  HISTORY
* Below this line, this part is controlled by TSTS. DO NOT MODIFY!!
伪时间片嵌入式平台(Task Step by Step Turn by Turn Structure，简称TSTS）
*============================================================================
****************************************************************************/

#include "tick.h"	


struct  _s_nos_tick_ s_nos_tick;



#ifdef D_use_tick_fum
void L1_tick_init(void)
{
	s_nos_tick.tp_count = 0;

	s_nos_tick.n_stamp = 0;  
	s_nos_tick.t1s_heatbeart= 0;
	/*****
		s_nos_tick.t1s_flag[0] = 0;
	s_nos_tick.t1s_flag[1] = 0;
	s_nos_tick.t1s_flag[2] = 0;
	s_nos_tick.t1s_flag[3] = 0;
	s_nos_tick.t1s_flag[4] = 0;
	s_nos_tick.t1s_flag[5] = 0;
		if(L2_tick_time_interval(n_stamp,7*D_Tdelay_1s))
			{// 时间溢出
			
			
			L2_tick_time_stamp(s->t_stamp);

	
	********/

	s_nos_tick.t_10ms = 0;
	s_nos_tick.t_1s = 0;

///	s_nos_tick.flag_1s = 0;

///	s_nos_tick.t_n = 0;
	//s_nos_tick.tmp = 0;
	//L0_timer0_ONF(1);
}

/// 定时器调用 10ms 一个中断
/// 定时器调用 25ms 一个中断
void L1_tick_tick (void)
{ 	///  	 65535*65535     /3600/24/365=139nian/s=1.39nian/10ms
	///相当于1.39年后t_10ms 溢出，对于电池供电的系统而言 完全可以满足
	// 4,294,836,225 = 65535*65535  ;3600*24*60*60 = 31,536,000秒/年
	s_nos_tick.tp_count++;
	s_nos_tick.t_10ms ++;//D_led_D1_REV(); 20160522 验证
	if(s_nos_tick.t_10ms%D_TIMER0_1S_COUNT == 0)
	{// 65535*65535/24/60/60/356/10 =12.7年 
			s_nos_tick.t_1s ++;//// 65535*65535/24/60/60/356/10 =12.7年 			 
			s_nos_tick.flag_1s2 = 1;
			s_nos_tick.t1s_heatbeart = 1;
	} 
//<<<<<<<<<<<<<<<<<<<<<<
}
#else

#endif

#if 0
void L1_tick_tick (void)
{
	s_nos_tick.t_n++;	
	if (s_nos_tick.t_n >= D_TIMER0_10MS_COUNT)//	5500--- 	  100 10s--556
	/// s  5ms		 65535*65535 /3600/24/365=139nian/s 
	// 4,294,836,225 = 65535*65535  ;3600*24*60*60 = 31,536,000秒/年
	// fixme:此处 保留了一个百年bug:)
	{
		s_nos_tick.t_10ms ++;//D_led_D1_REV(); 20160522 验证
		if(s_nos_tick.t_10ms%D_TIMER0_1S_COUNT == 0)
		{// 65535*65535/24/60/60/356/10 =12.7年 
				s_nos_tick.t_1s ++;//
			
			//	led_red =~led_red;
				//s_nos_tick.t1s_flag[0] = 1;
				//s_nos_tick.t1s_flag[1] = 1;
				//s_nos_tick.t1s_flag[2] = 1;
				//s_nos_tick.t1s_flag[3] = 1;
				//s_nos_tick.t1s_flag[4] = 1;
				//s_nos_tick.t1s_flag[5] = 1;
				s_nos_tick.flag_1s = 1;
				s_nos_tick.t1s_heatbeart = 1;
		}
		s_nos_tick.t_n = 0;
	}
	/*******************
//  0.2mm  4/0.2 = 20  20/60s = 333ms/maicong  
//   0.2mm 60s  60 100 ms
//  0.2  6000ms
// 平时为1  水满一次为0
// rain = 1;必须要做的初始化
	if(0 == rain)
	{
		if(1 == s_rain.temp)
		{// ````\___
			s_rain.pool = s_rain.t;
			s_rain.all ++;
			s_rain.t = 0;
		}
		s_rain.temp = 0;	
	}else
	{
		s_rain.temp = 1;
	}
	s_rain.t ++;
	
	******/
//<<<<<<<<<<<<<<<<<<<<<<
}


#endif