修改eeprom block bug

source/app/common.c

@@ -30,7 +30,7 @@ void L3_chip_encrypt_main(void)
 	Lc_buf_copy_uc((U8*)eep_enc.enc_val,(U8*)&G.mcu_enc_id,MCU_ID_LEN);
 
 	//4. 写入EEPROM
-	if(L1_eep_write_block(D_EEP_ENC_IN_SECTOR, D_EEP_ENC_IN_BLOCK, D_EEP_ENC_BLOCK_SIZE, (U8*)&eep_enc,sizeof(eep_enc),TRUE) == 0)
+	if(L1_eep_write_block(D_EEP_ENC_IN_SECTOR, D_EEP_ENC_IN_BLOCK, D_EEP_SECTOR_BLOCK_SIZE, (U8*)&eep_enc,sizeof(eep_enc),TRUE) == 0)
 	{
 		//L0_uart0_sendstr("e2p write success"); 
 		return;

source/app/main.c

@@ -107,7 +107,8 @@ void main(void)
 		{
 			s_nos_tick.t1s_heatbeart = 0;
 			//L0_uart0_uc('.');
-			P10 ^= 1;
+			P54 ^= 1;
+			P17 ^= 1;
 		}
 	}
 }

source/bsp/bsp_config.h

@@ -58,19 +58,19 @@
 	
 	//EEP存储地址定义
 	#define D_EEP_SECTOR_SIZE 0x200	//每个扇区0x200==512bytes
-	#define D_EEP_SECTOR_BLOCK_SIZE 0x40	//扇区中每个数据块0x40==64bytes，可选值[32,64,128]等
+	#define D_EEP_SECTOR_BLOCK_SIZE 0x80	//扇区中每个数据块0x40==64bytes，可选值[32,64,128]等
 	#define D_EEP_SECTOR_BLOCK_NUM (D_EEP_SECTOR_SIZE / D_EEP_PARAM_BLOCK_SIZE) //每个扇区数据块的数量
 	#define D_EEP_BLOCK_FILTER0 0xAA	//扇区中每个数据块的Filter字段值
 	#define D_EEP_BLOCK_FILTER1 0x55	
 	//EEP User Defined 参数区存储配置	
 	#define D_EEP_PARAM_IN_SECTOR 1		//eeprom参数区扇区地址，从0开始
 	#define D_EEP_PARAM_IN_BLOCK 0		//eeprom参数区数据块地址，从0开始
-	#define D_EEP_PARAM_BLOCK_SIZE 	(D_EEP_SECTOR_BLOCK_SIZE)	//参数区每个块大小，必须：D_EEP_PARAM_BLOCK_SIZE<=D_EEP_SECTOR_BLOCK_SIZE!!!，因为eeprom.h中是按照D_EEP_SECTOR_BLOCK_SIZE分配的buf
+	//#define D_EEP_PARAM_BLOCK_SIZE 	(D_EEP_SECTOR_BLOCK_SIZE)	//参数区每个块大小，必须：D_EEP_PARAM_BLOCK_SIZE<=D_EEP_SECTOR_BLOCK_SIZE!!!，因为eeprom.h中是按照D_EEP_SECTOR_BLOCK_SIZE分配的buf
-	#define D_EEP_PARAM_BLOCK_NUM 	(D_EEP_SECTOR_SIZE / D_EEP_PARAM_BLOCK_SIZE) //每个扇区数据块的数量
+	//#define D_EEP_PARAM_BLOCK_NUM 	(D_EEP_SECTOR_SIZE / D_EEP_PARAM_BLOCK_SIZE) //每个扇区数据块的数量
 	//EEP 加密区存储配置
 	#define D_EEP_ENC_IN_SECTOR 0 		//eeprom加密区扇区地址，从0开始
 	#define D_EEP_ENC_IN_BLOCK 0 		//eeprom加密区数据块地址，从0开始
-	#define D_EEP_ENC_BLOCK_SIZE 	0x20	//ENC_BLOCK_SIZE必须与加密程序中的ENC_BLOCK_SIZE匹配，此处不建议修改，如需修改，请同时修改加密程序
+	//#define D_EEP_ENC_BLOCK_SIZE 	0x20	//ENC_BLOCK_SIZE必须与加密程序中的ENC_BLOCK_SIZE匹配，此处不建议修改，如需修改，请同时修改加密程序
 
 #elif(TYPE_UASER_BOARD == TYPE_BOARD_SMMM_MB_VH032_0E)
 	xx