#ifndef APP_COMMON_H
#define APP_COMMON_H

#include "../clib/type.h"
#include "../bsp/bsp_config.h"

#define APP_VERSION 0x10

#define D_COUNT_WEIGHT(adc)    (U32)((adc)  / D_ADS1213_GAIN_VAL / R.p.lmd * R.p.weight_max * 1000  / (2 * 0x7FFFFF / 1000 ))
#define D_COUNT_ADC(wInG)      (U32)((wInG) * D_ADS1213_GAIN_VAL * R.p.lmd * (2 * 0x7FFFFF / 1000) / R.p.weight_max / 1000)


//STEP 1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Register CONFIG 
//寄存器编号从1开始
//#define D_COUNT_WEIGHT(adc) (U32)(1000.0 * R.p.weight_max * (adc) / (2 * 0x7FFFFF / 1000 * D_ADS1213_GAIN_VAL * R.p.lmd))
//#define D_blur_threshold_2_1(threshold)   (U32) ( 1.0 * threshold *(2 * 0x7FFFFF / 1000 * D_ADS1213_GAIN_VAL * R.p.lmd) / (1000.0 * R.p.weight_max ))
#define D_COUNT_WEIGHT(adc)    (U32)((adc)  / D_ADS1213_GAIN_VAL / R.p.lmd * R.p.weight_max * 1000  / (2 * 0x7FFFFF / 1000 ))
#define D_COUNT_ADC(wInG)      (U32)((wInG) * D_ADS1213_GAIN_VAL * R.p.lmd * (2 * 0x7FFFFF / 1000) / R.p.weight_max / 1000)

#define ADC_status_chx_Ready_BASE 0x01
#define ADC_status_ch1_Ready 0x01
#define ADC_status_ch2_Ready 0x02
#define ADC_status_ch3_Ready 0x04
#define ADC_status_ch4_Ready 0x08
#define D_ADC_CHANNEL_NUM 4	
typedef struct global_register
{
	//RO Register
	U16 reserved1;
	U32 total_weight;	//净重（显示重量）*100
	U32 total_zweight;	//皮重*100
	//RW Register
	U16 reserved2;
	U16 zero;	//清0标志，写入任何值清0（去皮）
	U16 status_eep_save;	//eep写入寄存器，1则写入eep并清0	
	//U16 reset;	//reset标志，写入任何值，所有参数恢复初始值
	struct 
	{	//需要持久化的参数，不能超过72字节，否则会导致eeprom溢出
		U16 slaver_id;
		U16 adc_ch_status;
		U16 weight_max;  //量程
		U16 lmd;	//2mv/v
		U16 adc_blur_mid;	//中值滤波
		U16 adc_blur_avg;	//均值滤波
		U16 adc_blur_shift[3];	//移位滤波点数
		U16 adc_blur_threshold[2];	//移位滤波阀值
	}p;
	U16 reserved3;
	U32 adval[D_ADC_CHANNEL_NUM];  //4路重量
	U32 ch_weight[D_ADC_CHANNEL_NUM];  //4路重量
	U32 rough_weight; // 毛重
}GlobalRegister;

extern GlobalRegister R;

//寄存器内存基地址
#define REG_MEM_BASE                ((U16*)(&R))	//寄存器基础地址（本文件外部不应该使用该宏定义）
//变量地址转寄存器
#define MEM_2_REG(mem)              (((U16*)(mem) - REG_MEM_BASE) + 1)
//寄存器转变量地址
#define REG_2_MEM(reg)              (REG_MEM_BASE + (U16)((reg) - 1))
//STEP 1 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<Register CONFIG End







//STEP 2 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Global Variables CONFIG 
typedef struct global_param
{
	U8 xx;
}GlobalParam;
extern struct global_param G;
//STEP 2 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<Global Variables CONFIG End

extern void L3_param_init(void);
extern void L3_reg_2_iap(void);
extern void L3_iap_2_reg(void);
extern void L3_reg_reset(void);
extern void L3_reg_init(void);

#endif