#include "bsp_WT2605B.h"
#include "../msp/UART3.h"


TS_SPEECH_AUDIO audio_powerdown 	      = {0x7E,0x07,0xA3,0x54,0x30,0x30,0x31,0x8F,0xEF};   
TS_SPEECH_AUDIO audio_poweron		      = {0x7E,0x07,0xA3,0x54,0x30,0x30,0x32,0x90,0xEF};
TS_SPEECH_AUDIO audio_wifi_connected 	= {0x7E,0x07,0xA3,0x54,0x30,0x30,0x33,0x91,0xEF};
TS_SPEECH_AUDIO audio_TCP_connected  	= {0x7E,0x07,0xA3,0x54,0x30,0x30,0x34,0x92,0xEF};
TS_SPEECH_AUDIO audio_config_mode 		= {0x7E,0x07,0xA3,0x54,0x30,0x30,0x35,0x93,0xEF};
TS_SPEECH_AUDIO audio_config_complete  = {0x7E,0x07,0xA3,0x54,0x30,0x30,0x36,0x94,0xEF};
TS_SPEECH_AUDIO audio_config_phone     = {0x7E,0x07,0xA3,0x54,0x30,0x30,0x37,0x95,0xEF};



TS_SPEECH_AUDIO audio_select 	      = {0x7E,0x07,0xA3,0x54,0x30,0x30,0x37,0x95,0xEF};
TS_SPEECH_AUDIO audio_begin 	      = {0x7E,0x07,0xA3,0x54,0x30,0x30,0x38,0x96,0xEF};
TS_SPEECH_AUDIO audio_tip 		      = {0x7E,0x07,0xA3,0x54,0x30,0x30,0x39,0x97,0xEF};

TS_SPEECH_AUDIO audio_zmg_again     = {0x7E,0x07,0xA3,0x54,0x30,0x30,0x3B,0x99,0xEF};
TS_SPEECH_AUDIO audio_zmg_success   = {0x7E,0x07,0xA3,0x54,0x30,0x30,0x3C,0x9A,0xEF};

TS_SPEECH_VOLUME	volume_control    = {0x7E,0x04,0xAE,0x1E,0xD0,0xEF};


void L2_WT2605B_init()
{
   D_stdIO_P0(BITN0);
	D_stdIO_P0(BITN1);
   //电源控制引脚
   D_HighI_P0(BITN5);
   L2_WT2605B_PWRON();
}

void L2_WT2605B_PWRON()
{
   D_P05_ON();
}
void L2_WT2605B_PWROFF()
{
   D_P05_OFF();
}

void L2_WT2605B_Broadcast(TS_SPEECH_AUDIO *music)
{
   L0_uart3_sendArray((U8 *)music,9);
}

void L2_WT2605B_VioceUp(void)
{
   if (volume_control.grade <= 0x1E)
   {
      volume_control.grade = volume_control.grade + 1;
   }
   volume_control.crc = 0xab;

   L0_uart3_sendArray((U8 *)&volume_control,6);
}

void L2_WT2605B_VioceDown(void)
{
   if (volume_control.grade >= 0x01)
   {
      volume_control.grade = volume_control.grade - 1;
   }
   volume_control.crc == 0xab;

   L0_uart3_sendArray((U8 *)&volume_control,6);
}