#ifndef APP_COMMON_H
#define APP_COMMON_H

#include "../clib/type.h"
#include "../bsp/bsp_config.h"
#include "../bsp/bsp_config.h"
#include "../tpc/ccmodbus.h"
#define APP_VERSION 0x10
#define SLAVER_TCP_SERVER_ID 0x10

#define D_COUNT_WEIGHT(adc)    (U32)((adc)  / D_ADS1213_GAIN_VAL / R.p.lmd * R.p.weight_max * 1000  / (2 * 0x7FFFFF / 1000 ))
#define D_COUNT_ADC(wInG)      (U32)((wInG) * D_ADS1213_GAIN_VAL * R.p.lmd * (2 * 0x7FFFFF / 1000) / R.p.weight_max / 1000)


//STEP 1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Register CONFIG 
//寄存器编号从1开始
//#define D_COUNT_WEIGHT(adc) (U32)(1000.0 * R.p.weight_max * (adc) / (2 * 0x7FFFFF / 1000 * D_ADS1213_GAIN_VAL * R.p.lmd))
//#define D_blur_threshold_2_1(threshold)   (U32) ( 1.0 * threshold *(2 * 0x7FFFFF / 1000 * D_ADS1213_GAIN_VAL * R.p.lmd) / (1000.0 * R.p.weight_max ))


#define CCMD_SLAVER_INFO_MAX 4
typedef struct global_register
{
	//RO Register
	U16 w600_mode;
	U16 pen_sta;
	U16 pen_net_sta;
	U16 pen_ele_sta;
	U16 question_sta;
	U16 spee_save;
	U32 oid3_order;
	U16 pack_order;
	U16 frame_order;
	U32 x_axis1;
	U32 y_axis1;
	U32 time1;
	U32 x_axis2;
	U32 y_axis2;
	U32 time2;
	CCMD_SLAVER_INFO ccmd_slaver_info[CCMD_SLAVER_INFO_MAX];
	
	//RW Register
	U16 reserved2;
	U16 zero;	//清0标志，写入任何值清0（去皮）
	U16 status_eep_save;	//eep写入寄存器，1则写入eep并清0	
	//U16 reset;	//reset标志，写入任何值，所有参数恢复初始值
	struct 
	{	//需要持久化的参数，不能超过72字节，否则会导致eeprom溢出
		U16 slaver_id;
	}p;
	U16 reserved3;

}GlobalRegister;

extern GlobalRegister R;

//寄存器内存基地址
#define REG_MEM_BASE                ((U16*)(&R))	//寄存器基础地址（本文件外部不应该使用该宏定义）
//变量地址转寄存器
#define MEM_2_REG(mem)              (((U16*)(mem) - REG_MEM_BASE))
//寄存器转变量地址
#define REG_2_MEM(reg)              (REG_MEM_BASE + (U16)((reg)))	//寄存及从0地址开始
//STEP 1 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<Register CONFIG End







//STEP 2 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Global Variables CONFIG 
typedef struct global_param
{
	//调试模式
	U8 debug;
	//station模式状态
	U8 st_status;	//0:none 	1:wifi_ok	2:tcp_connect_ok
    //station模式sid
    U8 st_sid[32];//必须是一个字符串  "ccsens\0"
    //station模式pwd
    U8 st_pwd[32];//必须是一个字符串  "ccsens123\0"
    //ap模式状态
    U8 ap_status;	//0: none  1: ap_ok	 2:tcp_server_ok
    //ap模式sid
    U8 ap_sid[32];
    //ap模式pwd
    U8 ap_pwd[32];
}GlobalParam;
extern struct global_param G;
//STEP 2 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<Global Variables CONFIG End

extern void L3_param_init(void);
extern void L3_reg_2_iap(void);
extern void L3_iap_2_reg(void);
extern void L3_reg_reset(void);
extern void L3_reg_init(void);

#endif