feature: 1.添加长时间无操作关机功能，默认时间为3min

source/app/app_config.c

@@ -116,6 +116,8 @@ void L3_reg_reset(void)
 {
 	U8 i = 0;
 
+	R.Operate_time = 0;
+	
 	R.app_status = POW_OFF;
 	
 	R.pen_sta = 0;

source/app/app_config.h

@@ -87,6 +87,8 @@ typedef struct global_register
 
 	APP_STATUS app_status;
 
+	U32 Operate_time;
+
 }GlobalRegister;
 
 extern GlobalRegister R;

source/app/main.h

@@ -1,39 +1,3 @@
-//////////////////////////////////////////////////////////////////////////  
-/// COPYRIGHT NOTICE  
-/// Copyright (c) 2017, 传控科技
-/// All rights reserved.  
-///  
-/// @file            main.c
-/// @brief           main app  
-///  
-///（本文件实现的功能的详述）  
-///  
-/// @version 1.1      CCsens technology 
-/// @author           CC 
-/// @date             20150102
-///  
-///  
-///     修订说明：最初版本
-/// Modified by:			
-/// Modified date:	
-/// Version:
-/// Descriptions:	
-///
-///
-///
-///
-///
-///
-///
-///  msp:    humtemp			flow
-///  bsp:   		i2c         adc        
-///
-///
-///
-///
-///
-//////////////////////////////////////////////////////////////////////////
-
 #ifndef   _MAIN_H
 #define   _MAIN_H
 

source/app/task_appstatus.c

@@ -1,15 +1,3 @@
-////////////////////////////////////////////////////////////////////////////  
-///@copyright  Copyright (c) 2018, 传控科技 All rights reserved.  
-///-------------------------------------------------------------------------  
-/// @file            bsp_drv.c
-/// @brief           bsp @ driver config
-///-------------------------------------------------------------------------  
-/// @version		1.0  
-/// @author			CC 
-/// @date			20180331
-/// @note			cc_AS_stc02
-//////////////////////////////////////////////////////////////////////////////
-
 #include "../app/task_appstatus.h"
 #include "../bsp/bsp_led.h"
 #include "../bsp/bsp_key.h"
@@ -47,6 +35,12 @@ void L3_task_appstatus_handler(S_TASK_APPSTATUS *s)
 		L2_task_go(D_task_DETECTCHANGE);
 
 	TTSS_Task_step(D_task_DETECTCHANGE)
+		if (R.app_status != POW_OFF)
+		{
+			//低功耗模式判断
+			PowerOff_judge();
+		}
+	
 		if(s->status != R.app_status)
 		{	
 			s->status = R.app_status;
@@ -148,3 +142,16 @@ void L3_task_appstatus_handler(S_TASK_APPSTATUS *s)
 
 	TTSS_Task_end();
 }
+
+// 无操作进入低功耗模式			
+void PowerOff_judge()
+{
+	U32 Nowtime = D_sys_now;
+	if( Nowtime - R.Operate_time > Noperate_Time_Seconds)    // 180000/JIFFIES = 180s
+	{
+		// R.ScrTouch_flag = 0;
+		R.app_status = POW_OFF;
+		L0_uart0_sendstr("R.app_status = POW_OFF!!!");
+		L0_uart0_0d0a();
+	}
+}

source/app/task_appstatus.h

@@ -1,16 +1,3 @@
-////////////////////////////////////////////////////////////////////////////  
-///@copyright  Copyright (c) 2018, 传控科技 All rights reserved.  
-///-------------------------------------------------------------------------  
-/// @file            bsp_drv.h
-/// @brief           bsp @ driver config
-///-------------------------------------------------------------------------  
-/// @version		1.0  
-/// @author			CC 
-/// @date			20180331
-/// @note			cc_AS_stc02
-
-//////////////////////////////////////////////////////////////////////////////
-
 #ifndef _TASK_APPSTATUS_H 
 #define _TASK_APPSTATUS_H 
 
@@ -18,6 +5,11 @@
 #include "../clib/clib.h"
 #include "app_config.h"
 
+
+#define Noperate_Time_MSeconds 180000     
+
+#define Noperate_Time_Seconds Noperate_Time_MSeconds/JIFFIES // 180000/JIFFIES = 180s
+
 typedef struct _s_task_appstatus
 {
 	TS_task task;
@@ -27,5 +19,6 @@ typedef struct _s_task_appstatus
 extern S_TASK_APPSTATUS _s_task_appstatus;
 extern void L3_task_AppStatus_init(void);
 extern void L3_task_appstatus_handler(S_TASK_APPSTATUS *s);
+extern void PowerOff_judge();
 
 #endif //	#ifndef

source/app/task_keystatus.c

@@ -44,13 +44,14 @@ void L3_task_keystatus_handler(S_TASK_KEYSTATUS *s)
 	TTSS_Task_step(D_task_KEY_DETECT)
 		if(L2_ReadKey3() == Key_Down)
 		{
+			R.Operate_time = D_sys_now;
 			if (s->Key3_Down_Begin_Time == 0)
 			{
 				s->Key3_Down_Begin_Time = D_sys_now;
 			}
 			else
 			{
-				U32 diff = D_sys_now -s->Key3_Down_Begin_Time;
+				U32 diff = D_sys_now - s->Key3_Down_Begin_Time;
 				// L0_uart0_ulhex(diff);				
 				if (diff >= LongKey_PWR_MSeconds/JIFFIES && s->Key3_handled == 0)
 				{
@@ -82,6 +83,7 @@ void L3_task_keystatus_handler(S_TASK_KEYSTATUS *s)
 		}
 		else if (L2_ReadKey1() == Key_Down)
 		{
+			R.Operate_time = D_sys_now;
 			if (s->Key1_handled == 0 && R.app_status != POW_OFF)
 			{
 				s->Key1_handled = 1;
@@ -91,6 +93,7 @@ void L3_task_keystatus_handler(S_TASK_KEYSTATUS *s)
 		}
 		else if (L2_ReadKey2() == Key_Down)
 		{
+			R.Operate_time = D_sys_now;
 			if (s->Key2_handled == 0 && R.app_status != POW_OFF)
 			{
 				s->Key2_handled = 1;

source/bsp/bsp_oid.c

@@ -8,6 +8,7 @@
 #include "../app/app_task_speech.h"
 #include "../bsp/bsp_WT2605B.h"
 #include "../bsp/bsp_wifi.h"
+#include "../app/app_config.h"
 
 /******************************************************************************************************
 															           变量定义
@@ -472,6 +473,7 @@ void L1_Oid_readoid(void)
 {	
 	if(!OID_DET)
 	{	
+		R.Operate_time = D_sys_now;
 		// L2_WT2605B_Broadcast(&audio_game_correct);
 		ts_oid.pre_x = ts_oid.X100;
 		ts_oid.pre_y = ts_oid.Y100;

source/bsp/chipid.c

@@ -42,7 +42,7 @@ void L0_id_get_chipid()
 	P_SW2 |= 0x80;  
 	for(i=0;i<MSP_ID_LEN;i++)
 	{
-		G.mcu_id[i] = ID_ADDR_IN_CHIPID[i];
+		G.mcu_id[i] = ID_ADDR_IN_CHIPID[3+i];
 	}
 }