DDB/source/app/task_key.c

////////////////////////////////////////////////////////////////////////////  
///@copyright  Copyright (c) 2018, 传控科技 All rights reserved.  
///-------------------------------------------------------------------------  
/// @file            bsp_test.c.c
/// @brief           bsp @ driver config
///-------------------------------------------------------------------------  
/// @version		1.0  
/// @author			CC 
/// @date			20180331
/// @note			cc_AS_stc02
//////////////////////////////////////////////////////////////////////////////
#include "task_key.h"
#include "../clib/clib.h"

struct _s_task_key_  s_task_key_handle;

void L0_key_init(void)
{
	//使能 INT1下降沿中断
	//IT0 = 0;
	//外部中断允许
	//EX0 = 1;
	//使能 INT1下降沿中断
	//IT1 = 0;
	//外部中断允许
	//EX1 = 1;
	L1_task_init(&s_task_key_handle.task);
	L3_task_s_go(s_task_key_handle,D_task_init);
}
#if 0
void INT0_isrHanddle(void)        D_SERVE_INT0
{
	struct _s_task_key_ *p = &s_task_key_handle;
	 EX0=0;  //关中断
	 //do sth
	 if(key1 == 0)
	 {
	 	//Lc_delay_ms(10);//按键防抖
		 if(key1 == 0)
		 {
		 	p->key1_ok = 1;
			while(!key1)
			{
				p->time1++;
			}
		 }
	 }
	 IE0 = 0;  //清除INT0中断程序执行过程中的中断请求
	 EX0 = 1;  //开中断
}
void INT1_isrHanddle(void)          D_SERVE_INT1
{
	struct _s_task_key_ *p = &s_task_key_handle;
	 EX1 = 0;  //关中断
	 //do sth
	 if(key2 == 0)
	 {
	 	//Lc_delay_ms(10);
		 if(key2 == 0)
		 {
		 	p->key2_ok = 1;
			while(!key2)
			{
				p->time2++;
			}
		 }
	 }
	 IE1 = 0;  //清除INT1中断程序执行过程中的中断请求
	 EX1 = 1;  //开中断
}
#endif
void L3_task_key_handle(struct _s_task_key_ *p)
{
		
		if(key1 == 0)
		 {
		 	//Lc_delay_ms(10);//按键防抖
			 if(key1 == 0)
			 {
			 	p->key1_ok = 1;
				while(!key1)
				{
					p->time1++;
					// L0_uart0_uchex(p->time1);
				}
			 } 
		 }
		if(p->key1_ok)
		{
			
			if(p->time1 >= 180)
			{   
				// L0_uart0_uc('#');
				// L0_uart0_uchex(p->time1);   
				// //LED1 = ~LED1; 
				// LED4 = ~LED4;				
			}
			else
			{				
				U8	front[14] = {0xFF,0xFE,0x0B,0x14,0x10,0x00,0x03,0x00,0x01,0x02,0x00,0x00,0x54,0xF3};
				LED3 = 1;
				Lc_delay_ms(100);
				LED3 = 0;
				LED3 = ~LED3;
				L3_gm35_send_data((U8 *)&front,14);
				
			#if 0
				U8 i;
				U8 mu[9];
				U8 music[9] = {0x7E,0x07,0xA3,0x43,0x30,0x30,0x39,0x86,0xEF}; 
				FF FE 0B 14 10 00 03 00 01 02 00 00 54 F3
				//7E 07 A3 43 30 30 39 86 EF 
				for(i = 0;i<9;i++)
				{
					mu[i] = music[i] & 0xFF;
				}
				L0_uart3_sendArray((U8 *)&mu, 9);
				L0_uart0_sendArray((U8 *)&mu, 9);
			
			#endif
			}
			p->key1_ok = 0;
			p->time1=0;
	}
		if(key2 == 0)
		 {
		 	//Lc_delay_ms(10);//按键防抖
			 if(key2 == 0)
			 {
			 	p->key2_ok = 1;
				while(!key2)
				{
					p->time2++;
				}
			 } 
		 }
		if(p->key2_ok)
		{
			if(p->time2>=180)
			{       
				//LED1 = ~LED1; 	
			}
			else
			{
				
				U8 back[14] = {0xFF,0xFE,0x0B,0x14,0x10,0x00,0x03,0x00,0x01,0x02,0x00,0x01,0x95,0x33};
				LED3 = 1;
				Lc_delay_ms(100);
				LED3 = 0;
				LED3 = ~LED3;
				L3_gm35_send_data((U8 *)&back,14);
				
			#if 0
				U8 i;
				U8 mu[9];
				U8 music[9] = {0x7E,0x07,0xA3,0x43,0x30,0x30,0x39,0x86,0xEF}; 
				//FF FE 0B 14 10 00 03 00 01 02 00 00 54 
				//7E 07 A3 43 30 30 39 86 EF 
				for(i = 0;i<9;i++)
				{
					mu[i] = music[i] & 0xFF;
				}
				L0_uart3_sendArray((U8 *)&mu, 9);
				L0_uart0_sendArray((U8 *)&mu, 9);
			
			#endif
			}
			p->key2_ok = 0;
			p->time2=0;
	}
#if 0
	if(p->key2_ok)
	{
		if(p->time2>=180)
		{
			LED1 = ~LED1;
		}
		else
		{
			LED2 = ~LED2;
		}
		p->key2_ok = 0;
		p->time2=0;
	}
#endif
	 if(key3 == 0)
	 {
	 	//Lc_delay_ms(10);//按键防抖
		 if(key3 == 0)
		 {
		 	p->key3_ok = 1;
			while(!key3)
			{
				p->time3++;
			}
		 } 
	 }
	if(p->key3_ok)
	{
		if(p->time3>=180)
		{
			LED3 = ~LED3;
			LED2 = ~LED2;
			LED1 = ~LED1;
			LED4 = ~LED4;
			Lc_delay_ms(100);
			// LED1 = 0;
			L3_gm35_send_str("+++");
			Lc_delay_ms(1000);
			//s_task_gm35_flow.mode=W600_AP;
			L3_task_gm35_flow_init(W600_AP);
			//G.w600_mode = 0;
		}
		else
		{
			//LED2 = ~LED2;
		}
		p->key3_ok = 0;
		p->time3=0;
	} 
	 

}