DDB/source/bsp/bsp_config.c

#include "bsp_config.h"
// #include "../msp/msp_UART0.h"
// #include "../msp/eeprom.h"
// #include "../msp/msp_eeprom.h"

////////////////////////////////////////////////////////////////////////////  
///@copyright  Copyright (c) 2018, 传控科技 All rights reserved.  
///-------------------------------------------------------------------------  
/// @file            bsp_func.c
/// @brief           bsp @ fuctiong ;  io复用选择等，和cpu型号息息相关
///-------------------------------------------------------------------------  
/// @version		1.0  
/// @author			CC 
/// @date			20180308
/// @note			cc_AS_stc02

//////////////////////////////////////////////////////////////////////////////
//struct _s_sysclk s_sysclk;

//==========================================================
//系统定时器回调
//初始化为NULL，timer0_isr中判断为NULL则不调用
//==========================================================


void L0_board_config(void)
{
#if (PIN_UART0_Rxd_30_Txd_31 == D_PIN_UART0)
	BITN_0(P_SW1 ,BITN7);//
	BITN_0(P_SW1 ,BITN6);// rxd p3.0 txd p3.1
#elif (PIN_UART0_Rxd_36_Txd_37 == D_PIN_UART0)
	BITN_0(P_SW1 ,BITN7);//
	BITN_1(P_SW1 ,BITN6);// rxd p3.6 txd p3.7
#elif (PIN_UART0_Rxd_16_Txd_17 == D_PIN_UART0)
	BITN_1(P_SW1 ,BITN7);//
	BITN_0(P_SW1 ,BITN6);// rxd p1.6 txd p1.7
#elif (PIN_UART0_Rxd_43_Txd_44 == D_PIN_UART0)
	BITN_1(P_SW1 ,BITN7);//
	BITN_1(P_SW1 ,BITN6);// rxd p4.3 txd p4.4
#else
	BITN_0(P_SW1 ,BITN7);//
	BITN_0(P_SW1 ,BITN6);// rxd p3.0 txd p3.1
#endif

	//uart2
	BITN_0(P_SW2 ,BITN0);// rxd2 p1.0 txd2 p1.1	
	//BITN_1(P_SW2 ,BITN0);// rxd2 p4.0 txd2 p4.2

	//uart3
	// P_SW2 = 0x00;// RXD3 P0.0, TXD3 P0.1
	BITN_0(P_SW2 ,BITN1);

	//uart4
	//BITN_1(P_SW2 ,BITN2);// rxd4 p5.2 txd4 p5.3	
	//BITN_0(P_SW2 ,BITN2);// rxd4 p0.2 txd4 p0.3

	//485 RE/DE 配置推完输出 P55
	//BITN_0(P5M1,BITN5);BITN_1(P5M0,BITN5);
	
	//LED
	//D_stdIO_P1(BITN7);
	//D_stdIO_P5(BITN5);

	//IO
	
	D_stdIO_P1(BITN0);
	D_stdIO_P1(BITN1);
	D_stdIO_P1(BITN2);

	D_stdIO_P1(BITN6);

	// D_stdIO_P3(BITN2);

	D_stdIO_P3(BITN4);
	D_stdIO_P3(BITN5);
	D_stdIO_P3(BITN6);
	D_stdIO_P3(BITN7);
	D_stdIO_P2(BITN7);
	D_stdIO_P2(BITN6);
	D_stdIO_P0(BITN2);

	D_HighI_P3(BITN4);
	D_HighI_P5(BITN0);
	D_HighI_P0(BITN5);
	P05 = 0;
	
	#if (TYPE_WDT_ENABLE == D_WDT_STATUS)
	WDT_CONTR = 0x27;     //使能看门狗,22M时钟下溢出时间约为5s，请注意添加喂狗程序
	#else
	WDT_CONTR = 0x00;  
	#endif

	//Lp0_Sys_timer_extern_handler被timer0中断调用
	//Lp0_Sys_timer_extern_handler = L1_Sys_timer_extern_handler;
}