DDB/source/app/task_key.c

////////////////////////////////////////////////////////////////////////////  
///@copyright  Copyright (c) 2018, 传控科技 All rights reserved.  
///-------------------------------------------------------------------------  
/// @file            bsp_test.c.c
/// @brief           bsp @ driver config
///-------------------------------------------------------------------------  
/// @version		1.0  
/// @author			CC 
/// @date			20180331
/// @note			cc_AS_stc02
//////////////////////////////////////////////////////////////////////////////
#include "task_key.h"
#include "../clib/clib.h"
#include "../msp/uart3.h"
#include "../msp/uart0.h"
#include "app_task_speech.h"

struct _s_task_key_  s_task_key_handle;

void L0_key_init(void)
{
	//使能 INT1下降沿中断
	//IT0 = 0;
	//外部中断允许
	//EX0 = 1;
	//使能 INT1下降沿中断
	//IT1 = 0;
	//外部中断允许
	//EX1 = 1;
	L1_task_init(&s_task_key_handle.task);
	L3_task_s_go(s_task_key_handle,D_task_init);
	s_task_key_handle.key1_ok = 0;
	s_task_key_handle.key2_ok = 0;
	s_task_key_handle.key3_ok = 0;
	s_task_key_handle.time1= 0;
	s_task_key_handle.time2 = 0;
	s_task_key_handle.time3 = 0;

}
#if 0
void INT0_isrHanddle(void)        D_SERVE_INT0
{
	struct _s_task_key_ *p = &s_task_key_handle;
	 EX0=0;  //关中断
	 //do sth
	 if(key1 == 0)
	 {
	 	//Lc_delay_ms(10);//按键防抖
		 if(key1 == 0)
		 {
		 	p->key1_ok = 1;
			while(!key1)
			{
				p->time1++;
			}
		 }
	 }
	 IE0 = 0;  //清除INT0中断程序执行过程中的中断请求
	 EX0 = 1;  //开中断
}
void INT1_isrHanddle(void)          D_SERVE_INT1
{
	struct _s_task_key_ *p = &s_task_key_handle;
	 EX1 = 0;  //关中断
	 //do sth
	 if(key2 == 0)
	 {
	 	//Lc_delay_ms(10);
		 if(key2 == 0)
		 {
		 	p->key2_ok = 1;
			while(!key2)
			{
				p->time2++;
			}
		 }
	 }
	 IE1 = 0;  //清除INT1中断程序执行过程中的中断请求
	 EX1 = 1;  //开中断
}
#endif
void L3_task_key_handle(struct _s_task_key_ *p)
{
		
	if(key1 == 0)
	{
		//Lc_delay_ms(10);//按键防抖
		if(key1 == 0)
		{
			p->key1_ok = 1;
			while(!key1)
			{
				p->time1++;
				// L0_uart0_uchex(p->time1);
			}
		} 
	}
	if(p->key1_ok == 1)
	{	
		if(p->time1 >= 10)
		{
			// L0_uart0_uchex(p->time1);   
			// //LED1 = ~LED1; 
			// LED4 = ~LED4;
			L0_uart0_sendstr("zmg");
			L0_uart0_0d0a();	
			L0_uart3_sendArray((U8 *)&audio_zmg,9);
			LED1 = ~LED1;		
		}
		else
		{	
		// 	L0_uart0_uc('A');			
		// //	U8	front[14] = {0xFF,0xFE,0x0B,0x14,0x10,0x00,0x03,0x00,0x01,0x02,0x00,0x00,0x54,0xF3};
		// 	LED3 = 1;
		// 	Lc_delay_ms(100);
		// 	LED3 = 0;
		// 	LED3 = ~LED3;
		// //	L3_gm35_send_data((U8 *)&front,14);
			#if 0
			U8 i;
			U8 mu[9];
			U8 music[9] = {0x7E,0x07,0xA3,0x43,0x30,0x30,0x39,0x86,0xEF}; 
			FF FE 0B 14 10 00 03 00 01 02 00 00 54 F3
			//7E 07 A3 43 30 30 39 86 EF 
			for(i = 0;i<9;i++)
			{
				mu[i] = music[i] & 0xFF;
			}
			L0_uart3_sendArray((U8 *)&mu, 9);
			L0_uart0_sendArray((U8 *)&mu, 9);
			#endif
		}
		p->key1_ok = 0;
		p->time1 = 0;
	}
	if(key2 == 0)
	{
		//Lc_delay_ms(10);//按键防抖
		if(key2 == 0)
		{
			p->key2_ok = 1;
			while(!key2)
			{
				p->time2++;
			}
		} 
	}
	if(p->key2_ok == 1)							//if(p->key2_ok) 这里的p->key2_ok总是被赋值为0xFB，原因未知
	{
		L0_uart0_sendstr("p->key2_ok = ");
		L0_uart0_uchex(p->key2_ok);
		L0_uart0_0d0a();
		if(p->time2>=10)
		{       
			L0_uart0_sendstr("zbt");
			L0_uart0_0d0a();
			L0_uart3_sendArray((U8 *)&audio_zbt,9);
			LED2 = ~LED2;	
		}
		else
		{				
			// U8 back[14] = {0xFF,0xFE,0x0B,0x14,0x10,0x00,0x03,0x00,0x01,0x02,0x00,0x01,0x95,0x33};
			// LED3 = 1;
			// Lc_delay_ms(100);
			// LED3 = 0;
			// LED3 = ~LED3;
			// L3_gm35_send_data((U8 *)&back,14);
			#if 0
			U8 i;
			U8 mu[9];
			U8 music[9] = {0x7E,0x07,0xA3,0x43,0x30,0x30,0x39,0x86,0xEF}; 
			//FF FE 0B 14 10 00 03 00 01 02 00 00 54 
			//7E 07 A3 43 30 30 39 86 EF 
			for(i = 0;i<9;i++)
			{
				mu[i] = music[i] & 0xFF;
			}
			L0_uart3_sendArray((U8 *)&mu, 9);
			L0_uart0_sendArray((U8 *)&mu, 9);
			#endif
		}
		p->key2_ok = 0;
		p->time2 = 0;
	}
	#if 0
	if(p->key2_ok)
	{
	if(p->time2>=180)
	{
		LED1 = ~LED1;
	}
	else
	{
		LED2 = ~LED2;
	}
	p->key2_ok = 0;
	p->time2=0;
	}
	#endif
	if(key3 == 0)
	{
		//Lc_delay_ms(10);//按键防抖
		if(key3 == 0)
		{
			p->key3_ok = 1;
			while(!key3)
			{
				p->time3++;
			}
		} 
	}
	if(p->key3_ok == 1)							//if(p->key3_ok) 这里的p->key3_ok总是被赋值为0x12，原因未知
	{	
		if(p->time3>=10)
		{
			L0_uart0_sendstr("SchulteGrid");
			L0_uart0_0d0a();
			L0_uart3_sendArray((U8 *)&audio_SchulteGrid,9);
			// LED3 = ~LED3;
			// LED2 = ~LED2;
			// LED1 = ~LED1;
			// LED4 = ~LED4;
			// Lc_delay_ms(100);
			// // LED1 = 0;
			// L3_gm35_send_str("+++");
			// Lc_delay_ms(1000);
			// //s_task_gm35_flow.mode=W600_AP;
			// L3_task_gm35_flow_init(W600_AP);
			// //G.w600_mode = 0;
		}
		else
		{
			//LED2 = ~LED2;
		}
		p->key3_ok = 0;
		p->time3 = 0;
	} 
}