DDB/source/bsp/bsp_config_const.h

////////////////////////////////////////////////////////////////////////////  
///@copyright  Copyright (c) 2017, 传控科技 All rights reserved.  
///-------------------------------------------------------------------------  
/// @file            bsp_config.h
/// @brief           hard config include
/// @info  FILE FOR HARDWARE SETUP AND SOFTWARE SETUP///FOR EXAMPLE: BAORD ,MCU,IDE
/// @info  YOU CAN CHANGE OR ADD THE DEFINE IF YOU NEED
/// @info  整个嵌入式项目的入口  首先是确认电路板  然后确认cpu 芯片型号  然后确认编译器  之后是软件框架  最后是应用程序  
/// @info    bsp_CONFIG  为其他头文件的始祖 TYPE_BOARD_xx
///-------------------------------------------------------------------------  
/// @version		1.1  
/// @author			CC 
/// @date			20180308
/// @note			
//////////////////////////////////////////////////////////////////////////////
/// @version		5.1  
/// @author			CC 
/// @date			20200301
/// @note			
//////////////////////////////////////////////////////////////////////////////


//////////////////////////////////////////////////////////////////////////
///存储器中的特殊参数
///全球唯一ID号 7FF9H~7FFFH BFF9H~BFFFH EFF9H~EFFFH FDF9H~FDFFH 7字节
///内部1.19V参考信号源 7FF7H~7FF8H BFF7H~BFF8H EFF7H~EFF8H FDF7H~FDF8H 毫伏（高字节在前）
///32K掉电唤醒定时器的频率 7FF5H~7FF6H BFF5H~BFF6H EFF5H~EFF6H FDF5H~FDF6H Hz （高字节在前）
///22.1184MHz的IRC参数（20M频段） 7FF4H BFF4H EFF4H FDF4H －
///24MHz的IRC参数（20M频段） 7FF3H BFF3H EFF3H FDF3H －
///20MHz的IRC参数（20M频段） 7FF2H BFF2H EFF2H FDF2H
///固件版本为7.3.12U
///以及后续版本有效
///27MHz的IRC参数（35M频段） 7FF1H BFF1H EFF1H FDF1H
///30MHz的IRC参数（35M频段） 7FF0H BFF0H EFF0H FDF0H
///33.1776MHz的IRC参数（35M频段） 7FEFH BFEFH EFEFH FDEFH
///35MHz的IRC参数（35M频段） 7FEEH BFEEH EFEEH FDEEH
///36.864MHz的IRC参数（35M频段） 7FEDH BFEDH EFEDH FDEDH
///保留 7FECH BFECH EFECH FDECH
///保留 7FEBH BFEBH EFEBH FDEBH
///20M频段的VRTRIM参数 7FEAH BFEAH EFEAH FDEAH
///35M频段的VRTRIM参数 7FE9H BFE9H EFE9H FDE9H
//////////////////////////////////////////////////////////////////////////

#ifndef   _BSP_CONFIG_CONST_H
#define   _BSP_CONFIG_CONST_H

#include <INTRINS.H>
#include "../clib/type.h"
#include "../clib/bit.h"

//>>>>>>>>>>>>>>>>>>>>>>.BORAD TYPE
#define TYPE_BOARD_hhnew			1
#define	TYPE_BOARD_st_sleep04_01		4
#define	TYPE_BOARD_st_sleep03		5
#define TYPE_BOARD_SMMM_MB_VH032_0E	6
#define TYPE_BOARD_LPC17xx_	8
#define TYPE_BOARD_STM32F_103ZET6_READBULL	1036
#define TYPE_BOARD_hh_CC_MD_VH05_anyriny_simple_m51		0x0551
#define TYPE_BOARD_hh_CC_MD_VH06_asMain_m6a7		0x6a7
#define TYPE_BOARD_TI26_MT01_M178	0x178		//会议计时器版v TI26_MT01-M178
#define TYPE_BOARD_stc5as32_WIFIBV01	532
#define TYPE_BOARD_SHC16LAXXQN32		1632		//SHC16LAXXQN32
#define TYPE_BOARD_PAPER6133_M0A6		0xa6		//打印机纸张传感
#define TYPE_BOARD_GSM_MAIN_V07			0xa7		//打印机运维板
#define TYPE_BOARD_ADDA_MAIN_V02		0xa8		//ADDA
#define TYPE_BOARD_433_0A				0xa9		//433
#define TYPE_BOARD_WEIGH_0B				0xaa		//称重
#define TYPE_BOARD_TOUCH_PEN_0B			0xab		//点读笔
//<<<<<<<<<<<<<<<<<<<<<<<<<<<.BORAD TYPE end

//>>>>>>>>>>>>>>>>>>>>>>MCU TYPE
#define TYPE_MCU_VENDOR_MSK    0xF0
#define TYPE_MCU_VENDOR_STC    0x10
#define TYPE_MCU_STC_8A		0x11
#define TYPE_MCU_STC_8F		0x12
#define TYPE_MCU_STC_8G		0x13
#define TYPE_MCU_STC_8H		0x14

#define TYPE_MCU_VENDOR_TI    0x60
#define TYPE_MCU_SHC6601	0x66
#define TYPE_MCU_LPC17xx	0x67
#define TYPE_MCU_STM32		0x68

#define D_CPUfamily_8bits	8
#define D_CPUfamily_16bits	16
#define D_CPUfamily_32bits	32
//<<<<<<<<<<<<<<<<<<<<<<MCU TYPE end

//>>>>>>>>>>>>>>>>>>>>>>IDE TYPE
#define TYPE_IDE_KEIL	1
#define TYPE_IDE_MDK	2
#define TYPE_IDE_IAR	3
//<<<<<<<<<<<<<<<<<<<<<<IDE TYPE end

//>>>>>>>>>>>>>>>>>>>>>>SysTimer TYPE
#define TYPE_JIFFIES_5MS	5
#define TYPE_JIFFIES_10MS	10
#define TYPE_JIFFIES_25MS	25
//<<<<<<<<<<<<<<<<<<<<<<<<<<<SysTimer TYPE end

//>>>>>>>>>>>>>>>>>>>>>>.WDT TYPE
#define TYPE_WDT_DISABLE	1
#define TYPE_WDT_ENABLE		2
//#define WDT_FEED()  WDT_CONTR |= 0x10
//<<<<<<<<<<<<<<<<<<<<<<<<<<<.SysTimer TYPE end

//>>>>>>>>>>>>>>>>>>>>>>.ByteOrder TYPE
#define TYPE_MCU_BIGENDIAN	1	//大端字节序
#define TYPE_MCU_LITENDIAN	2	//小端字节序
//<<<<<<<<<<<<<<<<<<<<<<<<<<<.ByteOrder TYPE end

//>>>>>>>>>>>>>>>>>>>>>>.代码加密 TYPE
#define TYPE_ENCRYPTION_ENABLE	1	//代码加密
#define TYPE_ENCRYPTION_DISABLE	2	//代码不加密
//<<<<<<<<<<<<<<<<<<<<<<<<<<<.ByteOrder TYPE end

//>>>>>>>>>>>>>>>>>>>>>>BUADRATE & StopBit
#define SBIT_1 1	//1 stop bit
#define SBIT_2 2	//2 stop bit
#define BRT_115200 115200
#define BRT_19200  19200
#define BRT_9600   9600
#define BRT_4800   4800
//<<<<<<<<<<<<<<<<<<<<<<BUADRATE & StopBit end

//>>>>>>>>>>>>>>>>>>>>>>MainFre
#define MainFre_5M  5529600L
#define MainFre_11M 11059200L
#define MainFre_22M 22118400L
#define MainFre_24M 24000000L
#define MainFre_27M 27000000L
//<<<<<<<<<<<<<<<<<<<<<<MainFre end

//>>>>>>>>>>>>>>>>>>>>>>UART0 PIN
#define PIN_UART0_Rxd_30_Txd_31		1
#define PIN_UART0_Rxd_36_Txd_37		2
#define PIN_UART0_Rxd_16_Txd_17  	3
#define PIN_UART0_Rxd_43_Txd_44  	4
//<<<<<<<<<<<<<<<<<<<<<<<<<<<.UART0 PIN
//>>>>>>>>>>>>>>>>>>>>>>UART2 PIN
#define PIN_UART2_Rxd_10_Txd_11		5

//<<<<<<<<<<<<<<<<<<<<<<<<<<<.UART2 PIN

//>>>>>>>>>>>>>>>>>>>>>>485 Type
#define TYPE_485_NONE	0
#define TYPE_485_MASTER	1
#define TYPE_485_SLAVER	2
//<<<<<<<<<<<<<<<<<<<<<<485 Type end

//>>>>>>>>>>>>>>>>>>>>>>G-SENSOR TYPE
#define TYPE_ASENSOR_ADXL362	362
#define TYPE_ASENSOR_MSA300		300
#define TYPE_ASENSOR	TYPE_ASENSOR_MSA300
//<<<<<<<<<<<<<<<<<<<<<<G-SENSOR TYPE end



#endif//_BSP_CONFIG_CONST_H
/*********************************end file*********************************************/