DDB/source/app/app_config.c

#include "app_config.h"
#include "../bsp/cs1232.h"
#include "../bsp/chipid.h"
#include "../msp/eeprom.h"
#include "../clib/clib.h"
GlobalParam G;
GlobalRegister R;

void L3_param_init(void)
{

	//station模式状态
	G.st_status = 0;	//0:none 	1:wifi_ok	2:tcp_connect_ok
    //station模式sid
	Lc_strcpy(G.st_sid,"ccsens");
    //station模式pwd
	Lc_strcpy(G.st_pwd,"ccsens123");
    //ap模式状态
	G.ap_status = 0;//0: none  1: ap_ok	 2:tcp_server_ok 	
    //ap模式sid
	Lc_strcpy(G.ap_sid,"cc_pen_ap");
    //ap模式pwd
	Lc_strcpy(G.ap_pwd,"ccsens123");
}


//读取reg内容，写入iap
void L3_reg_2_iap(void)
{
#if 0
	iapData.slaver_id = R.p.slaver_id;
	iapData.adc_ch_status = R.p.adc_ch_status;
	iapData.weight_max = R.p.weight_max;
	iapData.lmd = R.p.lmd;
	iapData.adc_blur_mid = R.p.adc_blur_mid;
	iapData.adc_blur_avg = R.p.adc_blur_avg;
	iapData.adc_blur_shift[0] = R.p.adc_blur_shift[0];
	iapData.adc_blur_shift[1] = R.p.adc_blur_shift[1];
	iapData.adc_blur_shift[2] = R.p.adc_blur_shift[2];
	iapData.adc_blur_threshold[0] = R.p.adc_blur_threshold[0];
	iapData.adc_blur_threshold[1] = R.p.adc_blur_threshold[1];
	//写入eeprom
	if(L1_eep_write_block(D_EEP_PARAM_IN_SECTOR, D_EEP_PARAM_IN_BLOCK, (U8*)&iapData,sizeof(IapData),TRUE) == 0)
	{
		L0_uart0_sendstr("e2p write success"); 
	}
#endif
	if(L1_eep_write_block(D_EEP_PARAM_IN_SECTOR, D_EEP_PARAM_IN_BLOCK, D_EEP_SECTOR_BLOCK_SIZE, (U8*)&R.p,sizeof(R.p),TRUE) == 0)
	{
		L0_uart0_sendstr("e2p write success"); 
		return;
	}
	L0_uart0_sendstr("e2p write failed"); 
}

//读取iap内容，写入reg
void L3_iap_2_reg(void)
{
#if 0
	if(L1_eep_read_block(D_EEP_PARAM_IN_SECTOR, D_EEP_PARAM_IN_BLOCK, (U8*)&iapData, NULL) == 1)
	{
		L0_uart0_sendstr("e2p read failed");
	}
	L0_uart0_sendstr("e2p read success");
	R.p.slaver_id = iapData.slaver_id;
	R.p.adc_ch_status = iapData.adc_ch_status;
	R.p.weight_max = iapData.weight_max ;
	R.p.lmd = iapData.lmd;
 	R.p.adc_blur_mid = iapData.adc_blur_mid;
	R.p.adc_blur_avg = iapData.adc_blur_avg;
	R.p.adc_blur_shift[0] = iapData.adc_blur_shift[0];
	R.p.adc_blur_shift[1] = iapData.adc_blur_shift[1];
	R.p.adc_blur_shift[2] = iapData.adc_blur_shift[2];
	R.p.adc_blur_threshold[0] = iapData.adc_blur_threshold[0];
	R.p.adc_blur_threshold[1] = iapData.adc_blur_threshold[1];
#endif
	if(L1_eep_read_block(D_EEP_PARAM_IN_SECTOR, D_EEP_PARAM_IN_BLOCK, D_EEP_SECTOR_BLOCK_SIZE, (U8*)&R.p, NULL) == 0)
	{
		L0_uart0_sendstr("e2p read success");
		return;
	}
	L0_uart0_sendstr("e2p read failed");
}

void L3_reg_reset(void)
{
	R.p.adc_ch_status = ADC_status_ch2_Ready | ADC_status_ch3_Ready | ADC_status_ch4_Ready;		//修改采集通道
	R.p.slaver_id = D_UART0_485_SLAVER_ID;	
	R.p.weight_max = 500;	//500kg
	R.p.lmd = 2;	//2mv/v
	R.p.adc_blur_mid = 1;
	R.p.adc_blur_avg = 6;
	R.p.adc_blur_shift[0] = 0;
	R.p.adc_blur_shift[1] = 2;
	R.p.adc_blur_shift[2] = 4;
	R.p.adc_blur_threshold[0] = 1600;	//g
	R.p.adc_blur_threshold[1] = 700;	//g
}

void L3_reg_init(void)
{
	//R.reserved1 = R.reserved2 = R.reserved3 = 0x55;
	//R.zero = 0;
	//R.status_eep_save = 0;	
	L3_reg_reset();
	L3_iap_2_reg();
}