DDB/source/app/app_config.h

#ifndef APP_COMMON_H
#define APP_COMMON_H

#include "../clib/type.h"
#include "../clib/clib.h"
#include "../bsp/bsp_config.h"
#include "../tpc/ccmodbus.h"
#include "../tpc/modbus.h"
//#include "../asp/asp_oid.h"

#define SERVER_ID 0x01
#define APP_VERSION 0x10
#define SLAVER_TCP_SERVER_ID 0x14
#define APP_VERSION_HEX 0x11	//高4位主版本，低4位次版本

#define D_COUNT_WEIGHT(adc)    (U32)((adc)  / D_ADS1213_GAIN_VAL / R.p.lmd * R.p.weight_max * 1000  / (2 * 0x7FFFFF / 1000 ))
#define D_COUNT_ADC(wInG)      (U32)((wInG) * D_ADS1213_GAIN_VAL * R.p.lmd * (2 * 0x7FFFFF / 1000) / R.p.weight_max / 1000)

//定义所使用内存的起始和结尾标志
#define HEAD0 0xa3
#define HEAD1 0xa4
#define TAIL0 0xa5
#define TAIL1 0xa6

#define EEPROM_DATA_ADDR 0x00 //定义一个起始地址为0x00的寄存器

//STEP 1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Register CONFIG 
//寄存器编号从1开始
//#define D_COUNT_WEIGHT(adc) (U32)(1000.0 * R.p.weight_max * (adc) / (2 * 0x7FFFFF / 1000 * D_ADS1213_GAIN_VAL * R.p.lmd))
//#define D_blur_threshold_2_1(threshold)   (U32) ( 1.0 * threshold *(2 * 0x7FFFFF / 1000 * D_ADS1213_GAIN_VAL * R.p.lmd) / (1000.0 * R.p.weight_max ))


#define CCMD_SLAVER_INFO_MAX 2
typedef struct pen_point
{
	U16 x_axis;//横坐标
	U16 y_axis;//纵坐标
	U32 time;//时间
	U16  angle;//角度
}PenPoint;

typedef	enum 
{
	POW_OFF = 0,				//关机状态
	POW_ON_WAIT = 1,			//等待开机状态
	POW_ON = 2,					//开机状态
	WIFI_CONFIG = 3,			//WIFI配网模式
	WIFI_CONFIG_Phone = 4,		//WIFI配网——手机APP配置连接中
	WIFI_CONFIG_COMPLETE = 5,	//WIFI配网成功
	WIFI_CONNECTED = 6,			//WIFI连接成功
	TCP_CONNECTED  = 7, 		//TCP连接成功

}APP_STATUS;



typedef struct global_register
{
	//RO Register
	U16 pen_sta;//点读笔状态
	U16 pen_net_sta;//联网状态
	U16 pen_ele_sta;//电池电量
	U16 question_sta;//问题 0上题 1下题
	U16 spee_order;//语音序号
	U32 oid3_order;//序号通知（oid3普通码）
	
	U16 null[25];
	
	//U16 pack_order;//包序号
	//U16 frame_order;//帧序号
	//U16 pack_mask;//包标志
	//Ts_OID_frame_xy_ points[POINT_LEN];

	struct {
	//oid type
	U8 type;
	//oid code
	U8 dat;
	}oid;

	struct {
	//oid type
	U8 type;
	//oid code
	U8 dat;
	}game;

	APP_STATUS app_status;

	U32 Operate_time;

}GlobalRegister;

extern GlobalRegister R;


//寄存器内存基地址
#define REG_MEM_BASE                ((U16*)(&R))	//寄存器基础地址（本文件外部不应该使用该宏定义）
//变量地址转寄存器
#define MEM_2_REG(mem)              (((U16*)(mem) - REG_MEM_BASE))
//寄存器转变量地址
#define REG_2_MEM(reg)              (REG_MEM_BASE + (U16)((reg)))	//寄存及从0地址开始
//STEP 1 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<Register CONFIG End



//STEP 2 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Global Variables CONFIG 
typedef struct global_param
{
	U8 head[2];
	U8 tail[2];

	// 电压
	U16 Vin;
	// 喇叭音量
	U8 volume;
	//调试模式
	U8 debug;
	U8 reset;
	//station模式状态
	U8 st_status;	//0:none 	1:wifi_ok	2:tcp_connect_ok
    //station模式sid
    U8 st_sid[32];//必须是一个字符串  "ccsens\0"
    //station模式pwd
    U8 st_pwd[32];//必须是一个字符串  "ccsens123\0"
    //ap模式状态
    U8 ap_status;	//0: none  1: ap_ok	 2:tcp_server_ok
    //ap模式sid
    U8 ap_sid[32];
    //ap模式pwd
    U8 ap_pwd[32];
	//w600联网模式
	U16 w600_mode;
	U16 status_eep_save;
	U16 slaver_id;
	
	vU32 modbusstmp;
	U16 authed;
	U16 flowStartVal;
	U8 mcu_id[7];
	
	U8 pen_up;
	U8 pen_down;
	U8 pen_hold;
	U8 pen_end;
	U8 pen_t;
	U8 oid_p;
	U8 oid_x;
	U8 datapkg;
	CCMD_SLAVER_INFO ccmd_slaver_info[CCMD_SLAVER_INFO_MAX];///16*3
}GlobalParam;

extern GlobalParam G;
//STEP 2 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<Global Variables CONFIG End
#if 0
typedef struct
{
	vU8 rIndex;//读标志
	vU8 Index;//读标志
	vU8 wIndex;//写标志
	vU8 full;//缓冲区满标志位
	vU8 null;//缓冲区空标志位
	vU8 maxsize;//数组最大长度 
	vU8 readdr;//缓冲区读写结束新地址
	vU8 relen;//从缓冲区头开始的新长度
	//PenPoint buf[POINT_LEN+6];//8*48*2
}WR_Buf;
extern WR_Buf wr_buf;
#endif
extern void L3_param_init(void);
extern void L3_reg_2_iap(void);
extern void L3_iap_2_reg(void);
extern void L3_reg_reset(void);
extern void L3_reg_init(void);
//extern void Lc_buf_full(WR_Buf *p);
//extern U16 Lc_write_cyc_buf(PenPoint *wbuf ,WR_Buf *wp ,U16 wlen);
//extern U16 Lc_read_cyc_buf(PenPoint *rbuf ,WR_Buf *rp ,U16 rlen);

#endif